13 KESKKONNA- JA TERVISEKAITSE. OHUTUS

Tagasi peagrupi juurde

Uued standardid

EVS-EN 1317-5:2007+A2:2012
Hind 16,10 EUR
Teepiirdesüsteemid. Osa 5: Sõidukipiirdesüsteemide toodetele esitatavad nõuded ja vastavushindamine KONSOLIDEERITUD TEKST
Käesolev Euroopa standard sätestab nõuded järgmiste sõidukipiirdesüsteemide vastavuse hindamiseks: a) põrkepiirded; b) põrkeleevendid; c) terminalid (jõustub pärast ENV 1317-4 vastuvõtmist EN standardina); d) üleminekud (jõustub pärast ENV 1317-4 vastuvõtmist EN standardina); e) sõiduki-/jalakäijapiirded (üksnes sõidukipiirdesüsteemide funktsioone täitvad). Käesolev dokument ei käsitle nõudeid jalakäijate rinnatistele. Käesolev dokument sisaldab nõudeid ilmastikukindluse hindamiseks. Käesolev dokument ei sisalda muid vastupidavusnõudeid (nt merekeskkonnas, liivast põhjustatud hõõrdumine). Ajutised piirded ei kuulu käesoleva dokumendi käsitlusalasse.
This European Standard specifies requirements for evaluation of conformity of the following vehicle restraint systems: a) safety barriers; b) crash cushions; c) terminals (will be effective when ENV 1317-4 becomes an EN); d) transitions (will be effective when ENV 1317-4 becomes an EN); e) vehicle / pedestrian parapets (only for the vehicle restraint function). Pedestrian parapet requirements are not covered in this document. Requirements for the evaluation of durability with respect to weathering are included in this document. Requirements for other forms of durability (e.g. marine environment, sand abrasion) are not included. Temporary barriers are not within the scope of this document.

CEN/TS 1317-8:2012
Hind 16,10 EUR
Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
This Technical Specification specifies requirements for the impact performance of systems designed for the reduction of impact severity for PTW riders impacting safety barriers whilst sliding along the ground, having fallen from their PTW vehicle. The protection systems concerned are those fitted to barriers or barriers that have an inherent PTW rider protection or risk reduction capability. This Technical Specification excludes the assessment of the vehicle restraint capabilities of barriers and the risk that they represent to the occupants of impacting cars. The assessment of performance of impacting vehicles is covered by EN 1317-1 and EN 1317-2. This Technical Specification defines performance classes taking into account rider speed classes, impact severity and the working width of the system with respect to rider impacts. For systems designed to be added to a standard barrier, the test results are valid only when the system is fitted to the model of barrier used in the tests since the performance will not necessarily be the same if the system is fitted to a different barrier.

CEN/TR 1317-6:2012
Hind 17,08 EUR
Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets
This Technical Report specifies geometrical and technical requirements for the design and manufacture for pedestrian parapets on road bridges, on footbridges, on top of retaining walls and on similar elevated structures. This Technical Report also specifies test methods and provision for the labelling and marking of these products. This Technical Report does not cover: - vehicle restraint systems; - pedestrian restraint systems in residential, commercial or industrial buildings and within their perimeter; - non-rigid rails i.e. rope, cables. This Technical Report may be used for pedestrian parapets on structures which cross over railways, rivers and canals.

EVS-EN 482:2012
Hind 10,90 EUR
Töökeskkonna õhu kvaliteet. Üldnõuded keemiliste toimeainete mõõteprotseduuride teostamiseks
This European Standard specifies general performance requirements for procedures for the determination of the concentration of chemical agents in workplace atmospheres as required by the Chemical Agents Directive 98/24/EC (see reference [7]). These requirements apply to all measuring procedures, irrespective of the physical form of the chemical agent (gas, vapour, airborne particles), the sampling method and the analytical method used. This European Standard is applicable to - all steps of a measuring procedure, - measuring procedures with separate sampling and analysis steps, and - direct-reading devices.

EVS-EN 671-1:2012
Hind 16,10 EUR
Paiksed tulekustutussüsteemid. Voolikusüsteemid. Osa 1: Pooljäiga voolikuga voolikupoolid
This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with semi-rigid hose for installation in buildings, permanently connected to a water supply, for use by the occupants. It also provides requirements on evaluation of conformity and marking of these products. Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements can be necessary in such cases. This European Standard is applicable to both manual and automatic fire hose reels for installation with and without cabinets.

EVS-EN 671-2:2012
Hind 15,40 EUR
Paiksed tulekustutussüsteemid. Voolikusüsteemid. Osa 2: Lamevoolikuga voolikusüsteemid
This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with lay-flat hose for installation in buildings, permanently connected to a water supply, for use by the occupants. Furthermore, it provides also for requirements on evaluation of conformity and marking of these products.Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements may be necessary in such cases.

IEC 60335-2-3:2012
Hind 74,04 EUR
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
IEC 60335-2-3:2012 deals with the safety of electric dry irons and steam irons, including those with a separate water reservoir or boiler having a capacity not exceeding 5 l, for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use, but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances, which are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction or children playing with the appliance. This standard does not apply to ironers (IEC 60335-2-44);

IEC 62474:2012
Hind 197,43 EUR
Material declaration for products of and for the electrotechnical industry
IEC 62474:2012 specifies the procedure, content, and form relating to material declarations for products of companies operating in and supplying the electrotechnical industry. Process chemicals and emissions during product use are not in the scope of this International Standard. It provides data to downstream manufacturers that:
- allows them to assess products against substance restriction compliance requirements;
- they can use in their environmentally conscious design process and across all product life cycle phases. A database associated with this document is available at http://std.iec.ch/iec62474. It contains the list of:
- Declarable substance groups and declarable substances;
- Reference Substances;
- Material classes;
- XML schema for data format and exchange and the accompanying developer table.

IEC 60335-2-23:2012
Hind 115,17 EUR
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
IEC 60335-2-23:2003+A1:2008+A2:2012 deals with the safety of electric appliances for the care of skin or hair of persons or animals, intended for household and similar purposes. The rated voltage of the appliance being not more than 250 V.

This publication is to be read in conjunction with IEC 60335-1:2010.

This consolidated version consists of the fifth edition (2003), its amendment 1 (2008) and its amendment 2 (2012). Therefore, no need to order amendments in addition to this publication.

IEC 60335-2-17:2012
Hind 197,43 EUR
Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances
IEC 60335-2-17:2012 deals with the safety of electric blankets, pads, clothing and other flexible appliances that heat the bed or human body, for household and similar purposes, their rated voltage being not more than 250 V. This standard also applies to control units supplied with the appliance. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used in beauty parlours or by persons in cold ambient temperatures, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction or children playing with the appliance. This third

IEC 60335-2-7:2012
Hind 205,66 EUR
Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines
IEC 60335-2-7:2008+A1:2011 deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard also deals with the safety of electric washing machines for household and similar use employing an electrolyte instead of detergent. Additional requirements for these appliances are given in Annex CC.

This publication is to be read in conjunction with IEC 60335-1:2010.

This consolidated version consists of the seventh edition (2008) and its amendment 1 (2011). Therefore, no need to order amendment in addition to this publication.

IEC 61496-1:2012
Hind 197,43 EUR
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
IEC 61496-1:2012 specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in Annex A. This third edition cancels and replaces the second edition published in 2004 and its amendment 1 (2007). The main changes with respect to the previous edition are as follows: The design, test and verification requirements have been updated to make them consistent with the latest standards for functional safety and EMC.

EVS-EN 60335-2-14:2006/A11:2012
Hind 7,38 EUR
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-14: Erinõuded köögimasinatele
This European Standard deals with the safety of electric kitchen machines for household and similar purposes, their rated voltage being not more than 250 V. NOTE Z101 Examples of appliances that are within the scope of this standard are - bean slicers; - berry-juice extractors; - blenders; - can openers; - centrifugal juicers; - churns; - citrus-fruit squeezers; - coffee mills not exceeding 500 g hopper capacity; - cream whippers; - egg beaters; - food mixers; - food processors; - grain grinders not exceeding 3 l hopper capacity; - graters; - ice-cream machines, including those for use in refrigerators and freezers; - knife sharpeners; - knives; - mincers; - noodle makers; - potato peelers; - shredders; - sieving machines; - slicing machines. Appliances intended to be used by laymen in shops and other premises for normal housekeeping purposes, are within the scope of this standard.

EVS-EN 60335-2-15:2003/A11:2012
Hind 6,47 EUR
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-15: Erinõuded vedelike kuumutamise seadmetele
This European Standard deals with the safety of electrical appliances for heating liquids for household and similar purposes, their rated voltage being not more than 250 V. NOTE Z101 Some appliances may be used for heating food. NOTE Z102 Examples of appliances that are within the scope of this standard are: - coffee-makers; - cooking pans; - egg boilers; - feeding-bottle heaters; - kettles and other appliances for boiling water, having a rated capacity not exceeding 10 l; - milk heaters; - pressure cookers having a rated cooking pressure not exceeding 140 kPa and a rated capacity not exceeding 10 l; - rice cookers; - slow cookers; - steam cookers; - wash boilers; - yoghurt makers. Appliances intended to be used by laymen in shops and other premises for normal housekeeping purposes, are within the scope of this standard.

EVS-EN 50379-3:2012
Hind 8,01 EUR
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances
This European Standard covers apparatus designed for checking the performance of heating appliances by measuring flue gas parameters of gas fired heating appliances for domestic residential and commercial applications. The apparatus may consist of different functional modules which may be tested separately for complying with this standard, and will be combined in different ways according to the different applications. Part 1 of EN 50379 specifies the general requirements and is supplemented by the requirements in EN 50379-2 and/or EN 50379-3. This European Standard specifies the performance requirements of portable spot reading apparatus designed to detect specific combustion flue gas parameters, such as concentration of gaseous compounds, temperature and/or pressure, to be used to decide if maintenance for the appliance is required and for adjusting the appliance during maintenance. This European Standard excludes apparatus for - checking appliances using fuels other than gas, - continuous emission, safety monitoring and control, and - use in vessels with an international load line.

EVS-EN 50379-1:2012
Hind 15,40 EUR
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods
This European Standard covers apparatus for measuring gas concentrations and other combustion parameters, as used in the installation and maintenance of heating appliances. Such apparatus may be used for testing the performance of appliances for different types of fuels, either by the installer, maintenance engineer or inspector. The apparatus may consist of different functional modules, which may be tested separately for complying with this standard and will be combined in different ways according to the different applications. This part of EN 50379 specifies the general requirements and is supplemented by the requirements in EN 50379-2 and/or EN 50379-3. This European Standard specifies general requirements for the construction, testing and performance of portable spot reading apparatus designed to give an assessment of specific combustion flue gas parameters, such as concentration of gaseous compounds, temperature and/or pressure, to check the combustion performance of heating appliances for domestic residential and commercial applications, using commercially available fuels. This European Standard excludes apparatus for - continuous emission, safety monitoring and control, and - use in vessels with an international load line.

EVS-EN 50379-2:2012
Hind 8,01 EUR
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment
This European Standard covers apparatus designed to measure flue gas parameters of heating appliances for domestic residential and commercial applications using commercially available fuels in compliance with metrological specification. The apparatus may consist of different functional modules that may be tested separately for complying with this standard and will be combined in different ways according to the different applications. Part 1 of EN 50379 specifies the general requirements and is supplemented by the requirements in EN 50379-2 and/or EN 50379-3. This European Standard specifies the performance requirements of portable spot reading apparatus designed to give a measurement of specific combustion flue gas parameters such as concentration of gaseous compounds, temperature and/or pressure to be used for testing the compliance with national regulations for the above mentioned appliances. This European Standard excludes apparatus for - continuous emission, safety monitoring and control, and - use in vessels with an international load line.

EVS-EN 60335-2-30:2010/A11:2012
Hind 5,62 EUR
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-30: Erinõuded ruumikütteseadmetele
This European Standard deals with the safety of electric room heaters for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE Z101 Examples of appliances that are within the scope of this standard are - convector heaters; - fan heaters; - heaters for use in greenhouses; - liquid-filled radiators; - panel heaters; - radiant heaters; - tubular heaters; - ceiling mounted heat lamp appliances. For extraction fans of ceiling mounted heat lamp appliances, EN 60335-2-80 is applicable as far as is reasonable. Appliances intended to be used by laymen in shops and other premises for normal housekeeping purposes, are within the scope of this standard.

CLC/TS 50131-2-8:2012
Hind 16,10 EUR
Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
This Technical Specification is for shock detectors installed in buildings to detect the shock or series of shocks due to a forcible attack through a physical barrier (for example doors or windows). It provides for security Grades 1-4 (see EN 50131-1), specific or non specific wired or wire-free detectors and uses Environmental Classes i-iv (see EN 50130-5). This Technical Specification does not include requirements for detectors intended to protect for example vaults and safes from penetration attacks from e.g. drilling, cutting or thermal lance. This Technical Specification does not include requirements for shock detectors intended for use outdoors. A detector shall fulfil all the requirements of the specified grade. Functions additional to the mandatory functions specified in this Technical Specification may be included in the detector, providing they do not adversely influence the correct operation of the mandatory functions. This Technical Specification does not apply to system interconnections.

EVS-EN 60335-2-25:2012
Hind 14,69 EUR
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-25: Erinõuded mikrolaineahjudele
This European Standard deals with the safety of microwave ovens for household and similar use, their rated voltage being not more than 250 V. This European Standard also deals with combination microwave ovens, for which Annex AA is applicable. This standard also deals with microwave ovens intended to be used on board ships, for which Annex BB is applicable. As far as is practicable, this European Standard deals with the common hazards presented by appliances that are encountered by all persons in household and similar environments. However, in general, it does not take into account: - children playing with the appliance; - the use of the appliance by very young children; - the use of the appliance by young children without supervision. It is recognized that very vulnerable people may have needs beyond the level addressed in this European Standard.

EVS-EN 61217:2012
Hind 19,05 EUR
Röntgenteraapia aparatuur. Koordinaadid, mehhanismid ja astmikud
This International Standard applies to equipment and data related to the process of TELERADIOTHERAPY, including PATIENT image data used in relation with RADIOTHERAPY TREATMENT PLANNING SYSTEMS, RADIOTHERAPY SIMULATORS, isocentric GAMMA BEAM THERAPY EQUIPMENT, isocentric medical ELECTRON ACCELERATORS, and non-isocentric equipment when relevant. The object of this standard is to define a consistent set of coordinate systems for use throughout the process of TELERADIOTHERAPY, to define the marking of scales (where provided), to define the movements of ME EQUIPMENT used in this process, and to facilitate computer control when used.

ISO 17491-2:2012
Hind 65,81 EUR
Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test)


ISO 12846:2012
Hind 70,75 EUR
Water quality -- Determination of mercury -- Method using atomic absorption spectrometry (AAS) with and without enrichment


ISO/TS 9241-411:2012
Hind 141,49 EUR
Ergonomics of human-system interaction -- Part 411: Evaluation methods for the design of physical input devices


ISO 10930:2012
Hind 65,81 EUR
Soil quality -- Measurement of the stability of soil aggregates subjected to the action of water


EVS-EN ISO 28803:2012
Hind 11,67 EUR
Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012)
This International Standard describes how International Standards concerned with the ergonomics of the physical environment can be applied for people with special requirements, who would otherwise be considered to be beyond the scope of those standards. It has been produced according to the principles of accessible design provided in ISO/IEC Guide 71 and using the data provided in ISO/TR 22411. It is not restricted to any specific environment but provides the general principles that allow assessment and evaluation, and can contribute to the development of standards concerned with specific environments. It is applicable to built environments as well as to other indoor, vehicle and outdoor environments. Nor is it restricted to specific environmental components; it includes assessment of acoustic environments, thermal environments, lighting, air quality and other environmental factors that could be considered to influence the health, comfort and performance of people with special requirements in an environment. It is applicable to all occupants of such environments who can be considered to have special requirements.

EVS-EN ISO 28802:2012
Hind 12,51 EUR
Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012)
This International Standard provides an environmental survey method for the assessment of the comfort and well-being of occupants of indoor and outdoor environments. It is not restricted to any particular environment, but provides the general principles that allow assessment and evaluation. It presents the principles for conducting an environmental survey to assess the comfort and well-being of people in environments. It gives guidance on the design of the survey, as well as on the environmental measurements used to quantify the environment and the subjective assessment methods used to quantify the occupants’ responses to that environment. It does not provide guidance on the design of subjective scales. It is applicable to built as well as other environments, including vehicle and outdoor environments, and to all the occupants of those environments who can be considered as providing valid responses to an environmental survey. There may be specific features of certain types of environment that have to be taken into account; however, the general principles it outlines will apply. This International Standard is not restricted to specific environmental components. It includes assessment of thermal environments, the acoustic environment, the visual and lit environment, air quality and other environmental factors that could be considered to influence the comfort and well-being of the occupants of an environment. It is a basic ergonomics standard which can contribute to the development of standards concerned with specific environments such as those found in buildings. It is intended to be used by people involved in the general assessment and evaluation of physical environments, including general ergonomics practitioners as well as those who develop standards and guidelines for specific applications.

EVS-EN 54-1:2011/AC:2012
Hind 0,00 EUR
Automaatne tulekahjusignalisatsioonisüsteem. Osa 1: Sissejuhatus
Parandus standardi EVS-EN 54-1:2011 eestikeelsele väljaandele.
Corrigendum to EVS-EN 54-1:2011 Estonian version.

Asendatud või tühistatud standardid

EVS-EN 482:2006
Töökeskkonna õhu kvaliteet. Üldnõuded keemiliste toimeainete mõõteprotseduuride teostamiseks
Standard määrab kindlaks töökoha õhus levivate keemiliste toimeainete kontsentratsiooni mõõtmisprotseduuride üldnõuded.
This document specifies general performance requirements for procedures determining the concentration of chemical agents in workplace atmospheres as required by the Chemical Agents Directive 98/24/EC (see [1]). These requirements apply to all measuring procedures, irrespective of the physical form of the chemical agent (gas, vapour, suspended matter) and of the sampling method or analytical method used.
Keel: Inglise

EVS-EN 1317-5:2007+A1:2008
Teepiirdesüsteemid. Osa 5: Sõidukipiirdesüsteemide toodetele esitatavad nõuded ja vastavushindamine KONSOLIDEERITUD TEKST
Käesolev Euroopa standard sätestab nõuded järgmiste sõidukipiirdesüsteemide vastavuse hindamiseks: a) põrkepiirded; b) põrkeleevendid; c) terminalid (jõustub pärast ENV 1317-4 vastuvõtmist EN standardina); d) üleminekud (jõustub pärast ENV 1317-4 vastuvõtmist EN standardina); e) sõiduki-/jalakäijapiirded (üksnes sõidukipiirdesüsteemide funktsioone täitvad). Käesolev dokument ei käsitle nõudeid jalakäijate rinnatistele. Käesolev dokument sisaldab nõudeid ilmastikukindluse hindamiseks. Käesolev dokument ei sisalda muid vastupidavusnõudeid (nt merekeskkonnas, liivast põhjustatud hõõrdumine). Ajutised piirded ei kuulu käesoleva dokumendi käsitlusalasse.
This European Standard specifies requirements for evaluation of conformity of the following vehicle restraint systems: a) safety barriers; b) crash cushions; c) terminals (will be effective when ENV 1317-4 becomes an EN); d) transitions (will be effective when ENV 1317-4 becomes an EN); e) vehicle / pedestrian parapets (only for the vehicle restraint function). Pedestrian parapet requirements are not covered in this document. Requirements for the evaluation of durability with respect to weathering are included in this document. Requirements for other forms of durability (e.g. marine environment, sand abrasion) are not included. Temporary barriers are not within the scope of this document.
Keel: Eesti, Inglise

EVS-EN 671-2:2002
Paiksed tulekustutussüsteemid. Voolikusüsteemid. Osa 2: Lamevoolikuga voolikusüsteemid
This standard specifies requirements and methods of tests for construction and performance of fire hose systems with lay-flat hose for installation in buildings and other construction works, permanently connected to a water supply, for use by the occupants.
Keel: Inglise

EVS-EN 671-1:2002
Paiksed tulekustutussüsteemid. Voolikusüsteemid. Osa 1: Pooljäiga voolikuga voolikupoolid
This standard specifies requirements and methods of test for construction and performance of fire hose reel systems with semi-rigid hose for installation in buildings and other construction works, permanently connnected to a water supply, for use by the occupants.
Keel: Inglise

EVS-EN 671-2:2002/A1:2004
Paiksed tulekustutussüsteemid. Voolikusüsteemid. Osa 2: Lamevoolikuga voolikusüsteemid
This standard specifies requirements and methods of tests for construction and performance of fire hose systems with lay-flat hose for installation in buildings and other construction works, permanently connected to a water supply, for use by the occupant
Keel: Inglise

EVS-EN 50379-3:2004
Specification for portable electrical apparatus designed to measure combusion flue gas parameters of heating appliances - Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances
This European Standard covers apparatus designed for checking the performance of heating appliances by measuring flue gas parameters of gas fired heating appliances for domestic residential and commercial applications. The apparatus may consist of different functional modules which may be tested separately for complying with this standard, and will be combined in different ways according to the different applications. The apparatus shall comply with the general requirements as specified in EN 50379-1 and the performance requirements of EN 50379-3.
Keel: Inglise

EVS-EN 50379-2:2004
Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 2: Performance requirements for apparatus used in statutory inspections and assessment
This European Standard covers apparatus designed to measure flue gas parameters of heating appliances for domestic residential and commercial applications using commercially available fuels in compliance with metrological specification.
Keel: Inglise

EVS-EN 60335-2-25:2003/A1:2005
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-25: Erinõuded mikrolaineahjudele
Deals with the safety of microwave ovens for household use. The rated voltage is less than 250 V. It also deals with combination microwave ovens. For commercial microvave ovens, see IEC 60335-2-90
Keel: Inglise

EVS-EN 60335-2-25:2003/A2:2006
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-25: Erinõuded mikrolaineahjudele
Deals with the safety of microwave ovens for household use. The rated voltage is less than 250 V. It also deals with combination microwave ovens. For commercial microvave ovens, see IEC 60335-2-90
Keel: Inglise

IEC 60335-2-17:2002
Household and similar electrical appliances - Safety - Part 2-17: Particular requirements forlankets, pads and similar flexible heating appliances
Deals with the safety of electriclankets, pads and other flexible appliances for heating theed or humanody, for household and similar purposes, their rated voltageeing not more than 250 V. This standard also deals with the control units supplied with the appliance.
Keel: Inglise

IEC 60335-2-17/Amd 1:2006
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-17: Particular requirements forlankets, pads and similar flexible heating appliances

Keel: Inglise

IEC 60335-2-17/Amd 2:2008
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-17: Particular requirements forlankets, pads and similar flexible heating appliances

Keel: Inglise

IEC 60335-2-3/Amd 1:2004
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

Keel: Inglise

IEC 60335-2-3/Amd 2:2008
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

Keel: Inglise

IEC 61496-1:2008
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
Specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in Annex A. The contents of the corrigendum of June 2008 haveeen included in this copy.
Keel: Inglise

IEC 61496-1/Amd 1:2007
Amendment 1 - Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
The contents of the corrigendum of June 2008 haveeen included in this copy.
Keel: Inglise

ISO 9241-4:1998/Cor 1:2000
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 4: Keyboard requirements

Keel: Inglise

ISO 9241-9:2000
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 9: Requirements for non-keyboard input devices

Keel: Inglise

ISO 5666:1999
Water quality -- Determination of mercury

Keel: Inglise

ISO 16590:2000
Water quality -- Determination of mercury -- Methods involving enrichment by amalgamation

Keel: Inglise

ISO 9241-4:1998
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 4: Keyboard requirements

Keel: Inglise

IEC 60335-2-3:2002
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
Deals with the safety of electric dry irons and steam irons. It includes those with a separate water reservoir oroiler with a capacity less than 5 l. It covers household use, usey laymen in shops, in light industry and on farms. For ironers, see IEC 60335-2-44. This consolidated version consists of the fifth edition (2002), its amendment 1 (2004) and its amendment 2 (2008). Therefore, no need to order amendments in addition to this publication.
Keel: Inglise

EVS-EN 61217:2010
Röntgenteraapia aparatuur. Koordinaadid, mehhanismid ja astmikud
This International Standard applies to equipment and data related to the process of tele-radiotherapy, including patient image data used in relation with radiotherapy treatment planning systems, radiotherapy simulators, isocentric gamma beam therapy equipment, isocentric medical electron accelerators, and non-isocentric equipment when relevant.
Keel: Inglise

EVS-EN 61217:2010/A1:2010
Röntgenteraapia aparatuur. Koordinaadid, mehhanismid ja astmikud
This International Standard applies to equipment and data related to the process of tele-radiotherapy, including patient image data used in relation with radiotherapy treatment planning systems, radiotherapy simulators, isocentric gamma beam therapy equipment, isocentric medical electron accelerators, and non-isocentric equipment when relevant.
Keel: Inglise

EVS-EN 61217:2010/A2:2010
Röntgenteraapia aparatuur. Koordinaadid, mehhanismid ja astmikud
This International Standard applies to equipment and data related to the process of tele-radiotherapy, including patient image data used in relation with radiotherapy treatment planning systems, radiotherapy simulators, isocentric gamma beam therapy equipment, isocentric medical electron accelerators, and non-isocentric equipment when relevant.
Keel: Inglise

EVS-EN 60335-2-25:2003/A11:2010
Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-25: Erinõuded mikrolaineahjudele
Deals with the safety of microwave ovens for household use. The rated voltage is less than 250 V. It also deals with combination microwave ovens. For commercial microvave ovens, see IEC 60335-2-90
Keel: Inglise

Kavandite arvamusküsitlus

prEN 13381-2
Tähtaeg 30.06.2012
Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
This part of this European Standard specifies a test method for determining the ability of a vertical protective membrane, when used as a fire resistant barrier, to contribute to the fire resistance (loadbearing capacity R) of loadbearing vertical structural building members fabricated from steel, concrete, steel/concrete composites or timber. The method described is applicable to any type of vertical protective membrane, which can be associated with a separate bracing membrane. The vertical protective membrane can be separate from the structural building member and is self-supporting . This test method is applicable to vertical protective membranes where there is a separating gap of at least 5 mm size between the vertical protective membrane and the structural building member, otherwise alternative test methods prEN 13381-3, prEN 13381-4, FprEN 13381-6 or ENV 13381-7 shall be used as appropriate This test method and assessment is not applicable to the following: a) all situations where the cavity is to be used as a service or ventilation shaft; b) all situations where the vertical protective membrane acts as a bracing membrane.
Keel: Inglise

prEN 12881-1
Tähtaeg 30.06.2012
Konveierilindid. Süttivuskatsed tulesimulatsiooniga. Osa 1: Katsed propaanipõletiga
This part of EN 12881 describes three methods for measuring the propagation of a flame along a conveyor belt which has been exposed to a relatively high localised heat source such as a fire. The damage suffered by the conveyor belt, as well as its tendency to support combustion, is measured by observing the extent to which the fire spreads along the test piece. Method A uses a test piece 2 m in length and consumes propane gas through the burner at the rate of (1,30 ± 0,05) kg per 10 min. Method B uses a test piece 1,5 m in length and consumes propane gas through the burner at the rate of (565 ± 10) g per 50 min. Method C uses a test piece 1,2 m in length and consumes propane gas through the burner at the rate of 150 l per hour (D1) or 190 l per hour (D2).
Keel: Inglise

prEN 16413
Tähtaeg 30.06.2012
Air quality - Biomonitoring with lichens - Assessing epiphytic lichen diversity
This European Standard aims to provide a reliable, repeatable and objective method for assessing epiphytic lichen diversity. According to international literature on the topic (see e.g. Nimis et al., 2002 for an overall outline), it provides a framework for assessing the impact of anthropogenic intervention , particularly for estimating the effects of atmospheric pollution.
Keel: Inglise

prEN 16414
Tähtaeg 30.06.2012
Air quality - Biomonitoring with mosses - Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples
This European Standard describes the sampling protocol and the preparation of samples of in situ mosses to monitor the bioaccumulation of atmospheric contaminants. This European Standard specifies the actions that should be taken from the field sampling of mosses to their final preparation before analysis for targeted contaminants. This European Standard is of interest to all operators wishing to conduct air quality biomonitoring studies.
Keel: Inglise

FprEN 1744-8
Tähtaeg 30.06.2012
Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
This European Standard specifies a simple method for the examination of Municipal Incinerator Bottom Ash (MIBA) Aggregates for the purpose of estimating the relative proportions of metallic constituents. This European standard describes the reference methods use for type testing and in case of dispute for estimating the relative proportions of aluminium or other metallic constituents of MIBA Aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established.
Keel: Inglise

prEN 15269-5
Tähtaeg 30.06.2012
Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assesmblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
This Part of prEN 15269, which should be read in conjunction with prEN 15269-1, covers single and double leaf, hinged and pivoted metal framed, glazed doorsets or openable windows. This document prescribes the methodology for extending the application of test results obtained from test(s) conducted in accordance with EN 1634-1. Subject to the completion of the appropriate test or tests selected from those identified in Clause 4 the extended application may cover all or some of the following non-exhaustive list: - Integrity only (E), radiation (EW) or insulated (EI1 or EI2) classifications; - Doorsets and openable windows - Door / window leaf; - wall/ceiling fixed elements (frame/suspension system); - glazing and non-glazed panels in doorset and openable window - items of building hardware; - decorative finishes; - intumescent, smoke, draught or acoustic seals; - alternative supporting construction(s).
Keel: Inglise

EN 60704-1:2010/FprAA
Tähtaeg 30.06.2012
Koduses ja sellega sarnanevas kasutuses elektriseadmed. Katse eeskiri õhu kaudu leviva müra määramiseks. Osa 1: Üldnõuded
This part of IEC 60704 applies to electric appliances (including their accessories or components) for household and similar use, supplied from mains or from batteries. By similar use is understood the use in similar conditions as in households, for example in inns, coffee-houses, tea-rooms, hotels, barber or hairdresser shops, launderettes, etc., if not otherwise specified in part 2. This standard does not apply to - appliances, equipment or machines designed exclusively for industrial or professional purposes; - appliances which are integrated parts of a building or its installations, such as equipment for air conditioning, heating and ventilating (except household fans, cooker hoods and free standing heating appliances), oil burners for central heating, pumps for water supply and for sewage systems; - separate motors or generators; - appliances for outdoor use.
Keel: Inglise

HD 60364-5-51:2009/prAA
Tähtaeg 30.06.2012
Ehitiste elektripaigaldised. Osa 5-51: Elektriseadmete valik ja paigaldamine. Üldjuhised
This part of HD 60364 deals with the selection of equipment and its erection. It provides common rules for compliance with measures of protection for safety, requirements for proper functioning for intended use of the installation, and requirements appropriate to the external influences foreseen.
Keel: Inglise

FprEN 60695-9-1
Tähtaeg 30.06.2012
Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
This part of IEC 60695 provides guidance for the assessment of surface spread of flame for electrotechnical products and the materials from which they are formed. It provides: - an explanation of the principles of flame spread for both liquids and solids, - guidance for the selection of test methods, - guidance on the use and interpretation of test results, and - informative references This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.
Keel: Inglise

prEVS-ISO 16000-17
Tähtaeg 30.06.2012
Siseõhk. Osa 17: Hallitusseente avastamine ja loendamine. Kasvatuspõhine meetod
See osa standardist ISO 16000 määratleb meetodid hallitusseente detekteerimiseks ja loendamiseks ISO 16000-18 alusel impaktori abil võetud aspiratsiooniproovides või ISO 16000-16 põhjal filtreerimise teel saadud proovides. See kohaldub samuti hallituse kultiveerimisel materjalisuspensioonist või otse plaadipinnalt.
This part of ISO 16000 specifies a method for the detection and enumeration of moulds by cultivation after sampling by impaction according to ISO 16000-18 or by filtration according to ISO 16000-16. It is also suitable for cultivation of moulds from material suspensions or from direct plating.
Keel: Eesti, Inglise

prEN ISO 16387
Tähtaeg 30.06.2012
Soil quality - Effects of pollutants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on reproduction (ISO/DIS 16387:2012)
This part of ISO 16387 specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and chemicals on the reproduction of Enchytraeus sp. by dermal and alimentary uptake in a chronic test. It is applicable to soils and soil materials of unknown quality e.g. from contaminated sites, amended soils, soils after remediation, agricultural or other sites under concern and waste materials. Effects of substances are assessed using a standard soil, preferably a defined artificial soil substrate. For contaminated soils, the effects are determined in the test soil and in a control soil. According to the objective of the study, the control and dilution substrate (dilution series of contaminated soil) should be either an uncontaminated soil comparable to the soil sample to be tested (reference soil) or a standard soil (e.g. artificial soil). Information is provided how to use this method for testing chemicals under temperate conditions. The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 0,013 3 Pa at 25 °C. NOTE No provision is made in the test method for monitoring the persistence of the substance under test. WARNING - Contaminated soils may contain unknown mixtures of toxic, mutagenic, or otherwise harmful chemicals or infectious micro-organisms. Occupational health risks may arise from dust or evaporated chemicals as well as via dermal contact during handling and incubation.
Keel: Inglise

prEN ISO 17249
Tähtaeg 30.06.2012
Saeketilõigetele vastupidavad kaitsejalatsid (ISO/DIS 17249:2012)
This international standard specifies requirements for safety footwear with resistance to chain saw cutting.
Keel: Inglise

FprEN ISO 5923
Tähtaeg 30.06.2012
Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide (ISO/FDIS 5923:2012)
This International Standard specifies requirements for carbon dioxide for use as a fire extinguishing medium.
Keel: Inglise

prEN ISO 15791-1
Tähtaeg 30.06.2012
Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO/DIS 15791-1:2012)
This part of ISO 15791 provides a framework guide for the development and use of intermediate-scale fire tests for products made of or containing plastics. The guidance identifies typical applications of plastics products and possible fire scenarios that can arise involving products in these applications. The development and use of intermediate-scale tests is described to ensure their relevance to the end use of the product.
Keel: Inglise

prEN ISO 28258
Tähtaeg 30.06.2012
Soil quality - Digital exchange of soil-related data (ISO/DIS 28258:2012)
This International Standard describes how to digitally exchange soil-related data. It aims to facilitate the exchange of valid, clearly described and specified soil-related data between individuals and organizations via digital systems and enables any soil data producer, holder or user to find and transfer data in an unambiguous way. This International Standard contains definitions of features, several parameter specifications and encoding rules that allow consistent and retrievable data exchange. It also allows to explicitly geo-reference soil data by building on existing ISO standards, thus facilitating the use of soil data within geographical information systems (GIS). Because soil data are of various origin and obtained according to a huge variety of description and classification systems, this International Standard provides no attribute catalogue, but a flexible approach to the unified encoding of soil data by implementing the rules of ISO 19156-2 observations and measurements (O & M) for the use in soil science. Figure 1 shows the fluxes of soil data, generic to many kinds of applications that can be organized by using the rules of this International standard.
Keel: Inglise