19 Testing

Back to ICS Groups

New Standards

CEN/TR 16332:2012
Price 10.19 EUR
Non-destructive testing - Interpretation of EN ISO/IEC 17024 for NDT personnel certification application
This European Standard is a CEN Technical Report (CEN/TR) on the application of EN ISO/IEC 17024 specifically for the implementation of EN 473. The guidance provided is in sequence with the criteria of EN ISO/IEC 17024:2003, and makes direct reference to EN 473 where no guidance is considered necessary because EN 473 provides the necessary detail. It is important to note that the guidance provided herein is specifically for certification bodies implementing EN 473, and not for employers implementing EN 4179:2009 which includes, in Clause 2, a normative reference to EN ISO/IEC 17024:2003.

IEC 61010-2-033:2012
Price 148.08 EUR
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage
IEC 61010-2-033:2012 specifies safety requirements for METERS. The METERS that have a primary purpose of measuring voltage on a live MAINS CIRCUIT are within the scope of this standard. They have various names, but all of them have capability for measurements of voltages on a live MAINS CIRCUIT. Some of the names given to this equipment are as follows:
- MULTIMETER;
- digital MULTIMETER;
- VOLTMETER;
- clamp METER (see also Part 2-032).
For the purpose of this standard, the term METER is used for these HAND-HELD measuring instruments.

This publication is to be read in conjunction with IEC 61010-1:2010.

EVS-EN 62059-32-1:2012
Price 9.49 EUR
Electricity metering equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature
The stability of metrological characteristics is one important aspect of durability. This part of IEC 62059 specifies a method for testing the stability of metrological characteristics of electricity meters, by operating a test specimen at the upper limit of the specified operating range of temperature, voltage and current for an extended period. Functional performance other than the accuracy of energy measurement is out of the scope of this standard. Note, that from the results of this test, no conclusion can be drawn for the length of period during which the stability of the metrological characteristics will be maintained when the meter is operated under usual conditions. This International Standard is applicable to all types of electricity meters in the scope of IEC TC 13.

Replaced Standards

EVS-EN 13146-6:2002
Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions
This European Standard specifies a laboratory test procedure for finding the effect of exposure to severe environmental conditions on the fastening system. This test procedure applies to a complete fastening assembly.
Language: English

Drafts

prEN ISO 14577-2
Deadline 6/30/2012
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO/DIS 14577-2:2012)
This part of ISO 14577 specifies the method of verification and calibration of testing machines for carrying out the instrumented indentation test in accordance with ISO/DIS 14577-1:2012. It describes a direct verification method for checking the main functions of the testing machine and an indirect verification method suitable for the determination of the repeatability of the testing machine. The indirect method shall be used in addition to the direct method and for the periodic routine checking of the testing machine in service. The indirect method of verification of the testing machine shall be carried out independently for each test method. This part of ISO 14577 is also applicable for transportable testing machines.
Language: English

prEN ISO 3452-2
Deadline 6/30/2012
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO/DIS 3452-2:2012)
This part of ISO 3452 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. This Part of the standard covers the temperature range 10 °C to 50 °C. Additional tests in Part 5 or Part 6 of ISO 3452 may be required outside this range. On-site control tests and methods are detailed in ISO 3452-1.
Language: English

prEN ISO 3452-3
Deadline 6/30/2012
Non-destructive testing - Penetrant testing - Part 3: reference test blocks (ISO/DIS 3452-3:2012)
This International Standard describes two types of reference blocks: - Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; - Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour contrast penetrant facilities and part-used containers. The reference blocks are to be used in accordance with part 1 of this International standard.
Language: English