35 INFOTEHNOLOOGIA. KONTORISEADMED

Tagasi peagrupi juurde

Uued standardid

CEN/TS 15480-4:2012
Hind 16,10 EUR
Identification card systems - European Citizen Card - Part 4: Recommendations for European Citizen Card issuance, operation and use
CEN/TS 15480-4 recommends card issuance and operational procedures including citizens' registration. CEN/TS 15480-4 gives recommendations with regard to the end-user e.g. with respect to privacy and accessibility aspects. CEN/TS 15480-4 also identifies a set of standard ECC card profiles (e.g. National ID Card, Health Card, Card issued by a Municipality), that can be used as basis for the specification of new ECC projects. For each profile, this Technical Specification uses a specified template which - selects a subset of technical requirements from CEN/TS 15480-1, CEN/TS 15480-2:2011 and CEN/TS 15480-3:2010. - considers the operation of the ECC in its particular environment. The target audience of CEN/TS 15480-4 is the card issuer.

CEN/TS 15430-2:2012
Hind 10,19 EUR
Winter and road service area maintenance equipment - Data acquisition and transmission - Part 2: Protocol for data transfer between information supplier and client application server
The function of this Technical Specification is to combine any vehicle equipment with different board computers to any client application server. The communication interface on vehicle is defined by EN 15430-1:2007+A1:2011. The interface between the information supplier server and the client application server is defined as a specific protocol (flow 3), object of the present Technical Specification. This makes interchangeability possible on both sides of the communication without any restriction in the range of communication technology including memory card, WLAN, GPRS or any other communication media.

EVS-EN 15876-1:2010+A1:2012
Hind 23,62 EUR
Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes CONSOLIDATED TEXT
This European Standard contains the Test Suite Structure (TSS) and Test Purposes (TP) to evaluate the conformity of On Board Units (OBU) and Roadside Equipment (RSE) to EN 15509. The objective of this document is to provide a basis for conformance tests for DSRC equipment (on board units and roadside units) to enable interoperability between different equipment supplied by different manufacturers.

IEC/PAS 62734:2012
Hind 300,26 EUR
Industrial communication networks - Fieldbus specifications - Wireless systems for industrial automation: process control and related applications
IEC/PAS 62734:2012(E) defines the OSI layer specifications (e.g., PhL, DL, etc.), security specifications, and management (including network and device configuration) specifications for wireless devices serving application classes 1 through 5 and optionally class 0 for fixed, portable, and moving devices. It addresses the performance needs for periodic monitoring and process control where latencies on the order of 100 ms can be tolerated, with optional behavior for shorter latency.

IEC/TR 61804-6:2012
Hind 57,58 EUR
Function blocks (FB) for process control - Electronic device description language (EDDL) - Part 6: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices
IEC/TR 61804-6:2012(E) provides an evaluation and assessment of electronic device description language (EDDL) technology. It provides guidance to device and system manufacturers for how EDDL technology can help them meet user requirements. It provides guidance to system integrators, as well as instrumentation and maintenance practitioners at end-user companies, on how EDDL technology can help them integrate systems and incorporate device management in their work processes. It gives examples of requirements from the NAMUR NE 105 recommendation. It's intent is to illustrate how EDDL technology and products based on EDDL technology meet these requirements.

CLC/TR 50173-99-3:2012
Hind 11,67 EUR
Information technology - Generic cabling systems - Part 99-3: Home cabling infrastructures up to 50 m in length to support simultaneous and non simultaneous provision of applications
This Technical Report describes a grading system applicable to telecommunications cabling within homes which provides a range of implementation solutions to support both non-simultaneous and simultaneous provision of applications incorporating: a) a cabling structure in accordance with, but less complex than that of, EN 50173-4 and with defined connecting hardware pin assignment for certain applications; b) components meeting or exceeding the requirements of EN 50173-4; c) shorter cabling channels than those specified in EN 50173-4. Safety (electrical safety and protection, optical power, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this Technical Report and are covered by standards and regulations. However information given in this Technical Report may be of assistance in meeting these standards and regulations.

EVS-EN 62264-5:2012
Hind 23,62 EUR
Enterprise system integration - Part 5: Business to manufacturing transactions
This part of IEC 62264 defines transactions in terms of information exchanges between applications performing business and manufacturing activities associated with Levels 3 and 4. The exchanges are intended to enable information collection, retrieval, transfer and storage in support of Enterprise-Control system integration. This part of IEC 62264 is consistent with the IEC 62264-1 models and terminology and IEC 62264-2 object model attributes. This standard also defines transactions that specify how to exchange the objects defined in IEC 62264-1, Clause 7, IEC 62264-2 and this standard. Other uses of the transaction model are not defined in this part. The models covered in this standard are: Personnel Model, Equipment Model, Maintenance Model, Material Model, Process Segment Model, Production Capability Model, Product Definition Model, Production Schedule Model, and Production Performance Model.

EVS-EN 62439-7:2012
Hind 22,15 EUR
Industrial communication networks - High availability automation networks - Part 7: Ring-based Redundancy Protocol (RRP)
The IEC 62439 series of standards is applicable to high-availability automation networks based on the ISO/IEC 8802-3:2000 (Ethernet) technology. This part of the IEC 62439 series specifies a redundancy protocol that is based on a ring topology, in which the redundancy protocol is executed at the end nodes, as opposed to being built into the switches. Each node detects link failure and link establishment using mediasensing technologies, and shares the link information with the other nodes, to guarantee fast connectivity recovery times. The nodes have equal RRP network management functions.

EVS-EN 61784-5-2:2012
Hind 26,50 EUR
Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
This part of IEC 61784 specifies the installation profiles for CPF 2 (CIP™1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2010.

EVS-EN 61784-5-15:2012
Hind 11,67 EUR
Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15
This part of IEC 61784 specifies the installation profiles for CPF 15/1 (MODBUS™-TCP)1 and CPF 15/2 (RTPS). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2010.

EVS-EN 61784-5-12:2012
Hind 10,90 EUR
Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12
This part of IEC 61784 specifies the installation profiles for CPF 12 (EtherCAT™) 1. The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2010.

EVS-EN 61784-5-14:2012
Hind 13,92 EUR
Industrial communication networks - Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14
This part of IEC 61784 specifies the installation profiles for CPF 14 (EPA)1. The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2010.

EVS-EN 62439-4:2010/A1:2012
Hind 5,62 EUR
Industrial communication networks - High availability automation networks - Part 4: Cross-network Redundancy Protocol (CRP)
The IEC 62439 series is applicable to high-availability automation networks based on the ISO/IEC 8802-3 (IEEE 802.3) (Ethernet) technology. This part of the IEC 62439 series specifies a redundancy protocol that is based on the duplication of the network, the redundancy protocol being executed within the end nodes, as opposed to a redundancy protocol built in the switches. The switchover decision is taken in each node individually. The cross-network connection capability enables single attached end nodes to be connected on either of the two networks.

EVS-EN 61784-5-3:2012
Hind 23,62 EUR
Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
This part of IEC 61784 specifies the installation profiles for CPF 3 (PROFIBUS/PROFINET)1.The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2010.

EVS-EN 61784-5-4:2012
Hind 13,92 EUR
Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4
This part of IEC 61784 specifies the installation profiles for CPF 4 (P-NET)1. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2010.

EVS-EN 61784-5-6:2012
Hind 17,08 EUR
Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
This part of IEC 61784 specifies the installation profiles for CPF 6 (INTERBUS)1. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2010.

EVS-EN 61784-5-10:2012
Hind 10,90 EUR
Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10
This part of IEC 61784 specifies the installation profile for CPF 10 (Vnet/IP™)1. The installation profile is specified in the annex. This annex is read in conjunction with IEC 61918:2010.

EVS-EN 61784-5-11:2012
Hind 13,22 EUR
Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11
This part of IEC 61784 specifies the installation profiles for CPF 11 (TCnet1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2010.

ISO/IEC 19794-8:2011/Cor 1:2012
Hind 0,00 EUR
Information technology — Biometric data interchange formats — Part 8: Finger pattern skeletal data TECHNICAL CORRIGENDUM 1


ISO/IEC 19794-2:2011/Cor 1:2012
Hind 0,00 EUR
Information technology — Biometric data interchange formats — Part 2: Finger minutiae data TECHNICAL CORRIGENDUM 1


ISO/IEC 19794-4:2011/Cor 1:2012
Hind 0,00 EUR
Information technology — Biometric data interchange formats — Part 4: Finger image data TECHNICAL CORRIGENDUM 1


ISO/IEC 19794-6:2011/Cor 1:2012
Hind 0,00 EUR
Information technology — Biometric data interchange formats — Part 6: Iris image data TECHNICAL CORRIGENDUM 1


ISO/IEC 15944-8:2012
Hind 195,79 EUR
Information technology -- Business Operational View -- Part 8: Identification of privacy protection requirements as external constraints on business transactions


ISO/IEC 21000-4:2006/Amd 2:2012
Hind 13,16 EUR
Protection of presentation element


ISO/IEC 23009-1:2012
Hind 184,27 EUR
Information technology -- Dynamic adaptive streaming over HTTP (DASH) -- Part 1: Media presentation description and segment formats


ISO/IEC 19794-9:2011/Cor 1:2012
Hind 0,00 EUR
Information technology — Biometric data interchange formats — Part 9: Vascular image data TECHNICAL CORRIGENDUM 1


ISO/IEC 24789-1:2012
Hind 126,69 EUR
Identification cards -- Card service life -- Part 1: Application profiles and requirements


ISO/IEC 2382-36:2008/Cor 1:2012
Hind 0,00 EUR
Information technology — Vocabulary — Part 36: Learning, education and training TECHNICAL CORRIGENDUM 1


ISO/IEC 30170:2012
Hind 195,79 EUR
Information technology -- Programming languages -- Ruby


ISO/IEC 23003-1:2007/Amd 1:2008/Cor 2:2012
Hind 0,00 EUR
Information technology — MPEG audio technologies Part 1: MPEG Surround AMENDMENT 1: Conformance testing TECHNICAL CORRIGENDUM 2


ISO/IEC 14496-28:2012
Hind 88,85 EUR
Information technology -- Coding of audio-visual objects -- Part 28: Composite font representation


ISO/IEC 14496-27:2009/Amd 4:2012
Hind 13,16 EUR
Conformance for efficient representation of 3D meshes with multiple attributes


ISO/IEC 14496-5:2001/Amd 31:2012
Hind 13,16 EUR
Reference software for efficient representation of 3D meshes with multiple attributes


ISO/IEC 14443-1:2008/Amd 1:2012
Hind 13,16 EUR
Additional PICC classes


ISO/IEC 29136:2012
Hind 95,43 EUR
Information technology -- User interfaces -- Accessibility of personal computer hardware


ISO/TS 9241-411:2012
Hind 141,49 EUR
Ergonomics of human-system interaction -- Part 411: Evaluation methods for the design of physical input devices


ISO/TS 19135-2:2012
Hind 47,71 EUR
Geographic information - Procedures for item registration -- Part 2: XML schema implementation


ISO/IEC 10373-6:2011/Amd 1:2012
Hind 13,16 EUR
Additional PICC classes


ISO/IEC 29109-5:2012
Hind 95,43 EUR
Information technology -- Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 -- Part 5: Face image data


ISO/IEC 19505-1:2012
Hind 195,79 EUR
Information technology -- Object Management Group Unified Modeling Language (OMG UML) -- Part 1: Infrastructure


ISO/IEC 19506:2012
Hind 195,79 EUR
Information technology -- Object Management Group Architecture-Driven Modernization (ADM) -- Knowledge Discovery Meta-Model (KDM)


ISO/IEC 19505-2:2012
Hind 195,79 EUR
Information technology -- Object Management Group Unified Modeling Language (OMG UML) -- Part 2: Superstructure


ISO/IEC 19500-2:2012
Hind 195,79 EUR
Information technology -- Object Management Group -- Common Object Request Broker Architecture (CORBA) -- Part 2: Interoperability


ISO/IEC 19500-1:2012
Hind 195,79 EUR
Information technology -- Object Management Group -- Common Object Request Broker Architecture (CORBA) -- Part 1: Interfaces


ISO/IEC 19500-3:2012
Hind 195,79 EUR
Information technology -- Object Management Group -- Common Object Request Broker Architecture (CORBA) -- Part 3: Components


ISO/IEC 19507:2012
Hind 195,79 EUR
Information technology -- Object Management Group Object Constraint Language (OCL)


ISO/IEC TR 12785-3:2012
Hind 88,85 EUR
Information technology -- Learning, education, and training -- Content packaging -- Part 3: Best practice and implementation guide


ISO/IEC 24800-6:2012
Hind 110,23 EUR
Information technology -- JPSearch -- Part 6: Reference software


ISO/TS 26683-2:2012
Hind 115,17 EUR
Intelligent transport systems -- Freight land conveyance content identification and communication (FLC-CIC) -- Part 2: Application interface profiles


ISO/IEC 19788-5:2012
Hind 110,23 EUR
Information technology -- Learning, education and training -- Metadata for learning resources -- Part 5: Educational elements


ISO/IEC 23000-12:2010/Amd 2:2012
Hind 13,16 EUR
Compact representation of dynamic volume change and audio equalization


ISO/IEC 29178:2012
Hind 60,88 EUR
Information technology -- Mobile item identification and management -- Service broker for Mobile AIDC services


ISO 13183:2012
Hind 75,68 EUR
Intelligent transport systems -- Communications access for land mobiles (CALM) -- Using broadcast communications


ISO/IEC 14496-10:2012
Hind 195,79 EUR
Information technology -- Coding of audio-visual objects -- Part 10: Advanced Video Coding


EVS-EN ISO 19111-2:2012
Hind 10,90 EUR
Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values (ISO 19111-2:2009)
This part of ISO 19111 specifies the conceptual schema for the description of spatial referencing using parametric values or functions. It applies the schema of ISO 19111 to combine a position referenced by coordinates with a parametric value to form a spatio-parametric coordinate reference system (CRS). The spatio-parametric CRS can optionally be extended to include time. The intended users of this part of ISO 19111 are producers and users of environmental information. Parameters which are attributes of spatial locations or features, but which are not involved in their spatial referencing, are not addressed by this part of ISO 19111.

EVS-EN ISO 19143:2012
Hind 22,15 EUR
Geographic information - Filter encoding (ISO 19143:2010)
This International Standard describes an XML and KVP encoding of a system neutral syntax for expressing projections, selection and sorting clauses collectively called a query expression. These components are modular and intended to be used together or individually by other standards which reference this International Standard. EXAMPLE 1 ISO 19142 makes use of some or all of these components. This International Standard defines an abstract component, named AbstractQueryExpression, from which other specifications can subclass concrete query elements to implement query operations. This International Standard also defines an additional abstract query component, named AbstractAdhocQueryExpresison, which is derived from AbstractQueryExpression and from which other specifications can subclass concrete query elements which follow the following query pattern: An abstract query element from which service specifications can subclass a concrete query element that implements a query operation that allows a client to specify a list of resource types, an optional projection clause, an optional selection clause, and an optional sorting clause to query a subset of resources that satisfy the selection clause. This pattern is referred to as an ad hoc query pattern since the server is not aware of the query until it is submitted for processing. This is in contrast to a stored query expression, which is stored and can be invoked by name or identifier. This International Standard also describes an XML and KVP encoding of a system-neutral representation of a select clause. The XML representation is easily validated, parsed and transformed into a server-specific language required to retrieve or modify object instances stored in some persistent object store.

EVS-EN ISO 19144-1:2012
Hind 14,69 EUR
Geographic information - Classification systems - Part 1: Classification system structure (ISO 19144-1:2009)
This part of ISO 19144 establishes the structure of a geographic information classification system, together with the mechanism for defining and registering the classifiers for such a system. It specifies the use of discrete coverages to represent the result of applying the classification system to a particular area and defines the technical structure of a register of classifiers in accordance with ISO 19135. The structure can be used to develop specific classification systems that address particular application areas, specified in other parts of ISO 19144.

EVS-EN ISO 19762-1:2012
Hind 15,40 EUR
Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - Part 1: General terms relating to AIDC (ISO/IEC 19762-1:2008)
This part of ISO/IEC 19762 provides general terms and definitions in the area of automatic identification and data capture techniques on which are based further specialized sections in various technical fields, as well as the essential terms to be used by non-specialist users in communication with specialists in automatic identification and data capture techniques.

EVS-EN ISO 19762-3:2012
Hind 11,67 EUR
Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - Part 3: Radio frequency identification (RFID) (ISO/IEC 19762-3:2008)
This part of ISO/IEC 19762 provides terms and definitions unique to radio frequency identification (RFID) in the area of automatic identification and data capture techniques. This glossary of terms enables the communication between non-specialist users and specialists in RFID through a common understanding of basic and advanced concepts.

Asendatud või tühistatud standardid

EVS-EN 61784-5-2:2008
Industrial communication networks - Profiles -- Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2
This part of IEC 61784 specifies the installation profiles for CPF 2 (CIP™1). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2007.
Keel: Inglise

EVS-EN 61784-5-6:2008
Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
This part of IEC 61784 specifies the installation profiles for the media specified in CPF 6 (INTERBUS)1. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2007.
Keel: Inglise

EVS-EN 61784-5-10:2008
Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10
This part of IEC 61784 specifies the installation profile for CPF 10 (Vnet/IP™1). The installation profile is specified in the annex. This annex is read in conjunction with IEC 61918:2007.
Keel: Inglise

EVS-EN 61784-5-11:2008
Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11
This part of IEC 61784 specifies the installation profile for CPF 11 (TCnet1). The installation profile is specified in the annex. This annex is read in conjunction with IEC 61918:2007.
Keel: Inglise

EVS-EN 61784-5-3:2008
Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
This part of IEC 61784 specifies the installation profiles for CPF 3 (PROFIBUS/PROFINET)1. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2007.
Keel: Inglise

ISO 9241-4:1998/Cor 1:2000
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 4: Keyboard requirements

Keel: Inglise

ISO 9241-9:2000
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 9: Requirements for non-keyboard input devices

Keel: Inglise

ISO 9241-4:1998
Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 4: Keyboard requirements

Keel: Inglise

ISO/IEC 19500-2:2003
Information technology -- Open Distributed Processing -- Part 2: General Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP)

Keel: Inglise

EVS-EN 15876-1:2010
Electronic fee collection - Conformity evaluation of on board unit and roadside equipment to EN 15509 - Part 1: Test suite structure and test purposes
This document contains the Test Suite Structure (TSS) and Test Purposes (TP) to evaluate the conformity of On Board Units (OBU) and Roadside Equipment (RSE) to EN 15509. The objective of the present document is to provide a basis for conformance tests for DSRC equipment (on board units and roadside units) to enable interoperability between different equipment supplied by different manufacturers.
Keel: Inglise

ISO/IEC 14496-10:2010
Information technology -- Coding of audio-visual objects -- Part 10: Advanced Video Coding

Keel: Inglise

ISO/IEC 29109-5:2011
Information technology -- Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 -- Part 5: Face image data

Keel: Inglise

Kavandite arvamusküsitlus

prEN 14890-1
Tähtaeg 30.06.2012
Application Interface for smart cards used as Secure Signature Creation Devices - Part 1: Basic services
This part specifies mandatory mechanisms for smart cards to be used as secure signature creation devices covering Signature creation User verification Device authentication Establishment of a secure channel others The specified mechanisms are suitable for other purposes like services in the context of IAS.
Keel: Inglise

prEN 16425
Tähtaeg 30.06.2012
Simple Publishing Interface
The scope of this NWI is to develop an Application Programming Interface (API) for querying learning object repositories, The aim is to produce an abstract API together with a set of bindings to different technologies.
Keel: Inglise

prEN 16426
Tähtaeg 30.06.2012
Simple Query Interface
The scope of this NWI is to develop a protocol that facilitates the transfer of metadata and content from tools that produce learning materials to applications that persistently manage learning objects and metadata.
Keel: Inglise

FprEN 13321-2
Tähtaeg 30.06.2012
Open Data Communication in Building Automation, Controls and Building Management - Home and Building Electronic Systems - Part 2: KNXnet/IP Communication
This specification defines the integration of KNX protocol implementations on top of Internet Protocol (IP) networks, called KNXnet/IP. It describes a standard protocol for KNX devices connected to an IP network, called KNXnet/IP devices. The IP network acts as a fast (compared to KNX transmission speed) backbone in KNX installations. - Widespread deployment of data networks using the Internet Protocol (IP) presents an opportunity to expand building control communication beyond the local KNX control bus providing: - Remote configuration; - Remote operation (including control and annunciation); - Fast interface from LAN to KNX and vice versa; - WAN connection between KNX systems (where an installed KNX system is at least one line). - A KNXnet/IP system contains at least these elements: - one EIB line with up to 64 (255) EIB devices; OR one KNX segment (KNX-TP1, KNX-TP0, KNX-RF, KNX-PL110, KNX-PL132); - a KNX-to-IP network connection device (called KNXnet/IP server); and typically additional - software for remote functions residing on e.g. a workstation (may be data base application, BACnet Building Management System, browser, ...).
Keel: Inglise

prEN 50174-3
Tähtaeg 30.06.2012
Infotehnoloogia. Juhtmete paigaldamine. Osa 3: Väljaspool hooneid asuvate süsteemide planeerimine ja paigaldamine
This European Standard specifies requirements and provides recommendations for the following aspects of information technology cabling: a) planning; b) installation practice. This European Standard is applicable to all types of information technology cabling outside buildings including generic cabling systems designed in accordance with EN 50173 series. The requirements and recommendations of this European Standard may be applied to cabling that is defined as part of the building. The requirements and recommendations of Clauses 4, 5 and 6 of this European Standard are subject to any site-specific requirements and recommendations of Clause 7. The planning of the pathway systems, spaces and structures within the core and access network cabling as described in Figure 2 is excluded (unless they are the property of the premises owner between the PEF and the buildings within the premises) except for requirements and recommendations that provide basic safety, function and environmental objectives for mechanical, ingress and climatic characteristics (i.e. excluding pathway dimensions, distribution of spaces and similar constraints based on specific transmission methods). The installation practices applicable to all cabling installation methods are included by the provision of the necessary planning requirements and recommendations associated with each one with the exception of information technology cabling installed: - around or within aerial power supply or associated earth conductors; - on infrastructures carrying power supplies in excess of AC/DC 25 kV.
Keel: Inglise

FprEN 62439-3
Tähtaeg 30.06.2012
Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR)
The IEC 62439 series is applicable to high-availability automation networks based on the ISO/IEC 8802-3 (Ethernet) technology. This part of the IEC 62439 series specifies two redundancy protocols designed to provide seamless recovery in case of single failure of an inter-bridge link or bridge in the network, which are based on the same scheme: duplication of the LAN, resp. duplication of the transmitted information.
Keel: Inglise

prEVS-ISO/IEC 25000
Tähtaeg 30.06.2012
Tarkvaratehnika. Tarkvaratoote kvaliteedinõuded ja kvaliteedi hindamine (SQuaRE). Sarja SQuaRE teejuht
See standard annab juhiseid tarkvaratoote kvaliteedinõuete ja kvaliteedi hindamise uue standardisarja (SQuaRE) kasutamiseks. Selle teejuhi eesmärk on anda üldine ülevaade sarja SQuaRE sisust, ühistest etalonmudelitest ja määratlustest ning ka seostest dokumentide vahel, võimaldades kasutajail vastavalt nende kasutuseesmärkidele saada head ettekujutust sellest standardisarjast. Selles dokumendis seletatakse üleminekuprotsessi vanadelt sarjadelt ISO/IEC 9126 ja 14598 sarjale SQuaRE ning antakse ka teavet selle kohta, kuidas kasutada sarju ISO/IEC 9126 ja 14598 nende senisel kujul. Standardisari SQuaRE on mõeldud, kuid mitte ainult, tarkvaratoodete väljatöötajaile, hankijaile ja sõltumatuile hindajaile, eriti neile, kes vastutavad tarkvara kvaliteedinõuete spetsifitseerimise ja tarkvaratoodete hindamise eest. Sarja SQuaRE ning ka standardisarjade ISO/IEC 14598 ja 9126 kasutajail on soovitatav kasutada ka käesolevat standardit juhisena oma ülesannete täitmisel.
This International Standards provides guidance for the use of the new series of International Standards named Software product Quality Requirements and Evaluation (SQuaRE). The purpose of this Guide is to provide a general overview of SQuaRE contents, common reference models and definitions, as well as the relationship among the documents, allowing users of the Guide a good understanding of those series of standards, according to their purpose of use. This document contains an explanation of the transition process between the old ISO/IEC 9126 and the 14598 series and SQuaRE and also presents information on how to use the ISO/IEC 9126 and 14598 series in their previous form. SQuaRE series of standards is intended for, but not limited to, developers, acquirers and independent evaluators of software products, particularly those responsible for defining software quality requirements and for software product evaluation. It is recommended that users of the SQuaRE as well as ISO/IEC 14598 and 9126 series of standards also use this International Standard as a guide to execute their tasks.
Keel: Eesti, Inglise

FprEN ISO 16484-5
Tähtaeg 30.06.2012
Building automation and control systems - Part 5: Data communication protocol (ISO/FDIS 16484-5:2012)
This part of ISO 16484 defines data communication services and protocols for computer equipment used for monitoring and control of heating, ventilation, air-conditioning and refrigeration (HVAC&R) and other building systems. It defines, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and use of digital control technology in buildings. The scope and field of application are furthermore detailed in Clause 2 of the enclosed ANSI/ASHRAE publication.
Keel: Inglise

prEN ISO 19101-1
Tähtaeg 30.06.2012
Geographic information - Reference model - Part 1: Fundamentals (ISO/DIS 19101-1:2012)
This International Standard defines the reference model for standardization in the field of geographic information. This reference model describes the notion of interoperability and sets forth the fundamentals by which this standardization takes place. The description of the reference model is supported by a conceptual framework. The conceptual framework is a mechanism to structure the scope of the standardization activity in geographic information according to the interoperability description. It identifies the various facets of standardization and the relationships that exist between them. This reference model settles the role of semantics, how the new technologies such as the Web and many emerging ways of accessing it, and how the Semantic Web can support interoperability in the field of geographic information. It also provides an umbrella under which additional specific reference models on particular facets of geographic information standardization would be required. Although structured in the context of information technology and information technology standards, this International Standard is independent of any application development method or technology implementation approach.
Keel: Inglise

prEN ISO 10781
Tähtaeg 30.06.2012
Electronic health record-system functional model (ISO/DIS 10781:2012)
This conformance clause defines the minimum requirements for functional profiles claiming conformance to the EHR System Functional Model. It also identifies how EHR systems achieve conformance to the Functional Model, which is via the system’s conformance to a particular functional domain profile, multiple functional profiles, or combination of domain and companion profiles. This clause specifies: - The purpose, structure, and use of conformance criteria that are to be included in the Functional Model and conforming functional profiles, - The rules for defining conforming functional profiles of the Functional Model, - The relationship between functional profiles and EHR systems, - Sample conformance clauses and use case scenarios, - Guidance on the conformance requirements that a functional profile might levy on EHR systems, - Guidance on the purpose and use of an EHR system Conformance Statement. While the conformance requirements for functional profiles can be found in this clause, they necessarily reference the Functional Model and other sources. This conformance clause does not specify testing or validation procedures to assess a functional profile’s conformance to the Functional Model. It also does not specify testing or validation procedures to determine whether an EHR system conforms to a functional profile or matches its Conformance Statement.
Keel: Inglise

FprEN ISO 11073-10420
Tähtaeg 30.06.2012
Health informatics - Personal health device communication - Part 10420: Device specialization - Body composition analyzer (ISO/FDIS 11073-10420:2012)
Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between personal body composition analyzing devices and managers (e.g. cell phones, personal computers, personal health appliances, set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards including ISO/IEEE 11073 terminology and IEEE Std 11073-20601™-20081 information models. It specifies the use of specific term codes, formats, and behaviors in telehealth environments restricting optionality in base frameworks in favor of interoperability. This standard defines a common core of communication functionality for personal telehealth body composition analyzer devices. In this context, body composition analyzer devices are being used broadly to cover body composition analyzer devices that measure body impedances, and compute the various body components including body fat from the impedance.
Keel: Inglise

FprEN ISO 11073-10472
Tähtaeg 30.06.2012
Health Informatics - Personal health device communication - Part 10472: Device specialization - Medication monitor (ISO/FDIS 11073-10472:2012)
Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between medication monitoring devices and managers (e.g., cell phones, personal computers, personal health appliances, set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards including ISO/IEEE 11073 terminology and information models. It specifies the use of specific term codes, formats, and behaviors in telehealth environments restricting ambiguity in base frameworks in favor of interoperability. This standard defines a common core of communication functionality for medication monitors. In this context, medication monitors are defined as devices that have the ability to determine and communicate (to a manager) measures of a user’s adherence to a medication regime.
Keel: Inglise

FprEN ISO 11073-30400
Tähtaeg 30.06.2012
Health informatics - Point-of-care medical device communication - Part 30400: Interface profile - Cabled Ethernet (ISO/FDIS 11073-30400:2012)
This document focuses on the application of the Ethernet family (IEEE Std 802.3TM-20081) of protocols for use in medical device communication. The scope is limited to referencing the appropriate Ethernet family specifications and to calling out any specific special needs or requirements of the ISO/IEEE 11073 environment, with a particular focus on easing interoperability and controlling costs.
Keel: Inglise

FprEN ISO 11073-10421
Tähtaeg 30.06.2012
Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO/FDIS 11073-10421:2012)
The scope of this standard is to establish a normative definition of communication between personal telehealth peak flow monitoring devices (agents) and managers (e.g., cell phones, personal computers, personal health appliances, and set top boxes) in a manner that enables plug-and-play interoperability. It leverages work done in other ISO/IEEE 11073 standards including existing terminology, information profiles, application profile standards, and transport standards. It specifies the use of specific term codes, formats, and behaviors in telehealth environments restricting optionality in base frameworks in favor of interoperability. This standard defines a common core of functionality of a peak-flow monitoring device. The use case is restricted to personal respiratory monitoring and therefore does not include hospital-based spirometry. Continuous and high-acuity monitoring (e.g., for emergency response) are outside the scope of the use case.
Keel: Inglise