71 KEEMILINE TEHNOLOOGIA

Tagasi peagrupi juurde

Uued standardid

CEN/TS 15912:2012
Hind 13,92 EUR
Durability of reaction to fire performance - Classes of fireretardant treated wood-based product in interior and exterior end use applications
This European Technical Specification describes the characteristics which fire-retardant treated wood products should exhibit so that their fire-retardant properties persist undiminished throughout the desired service life in the anticipated conditions of use. The Technical Specification prescribes the classification requirements for the durability of the reaction to fire performance of fire-retardant treated wood-based products to be used in interior and exterior end use conditions. The products initially need to meet required reaction to fire classification. For interior and exterior use, limited hygroscopicity needs to be verified. In addition, products for exterior use needs to meet the minimum durability of reaction to fire performance requirements specific to the end use. The requirements are applicable for fire-retardant treated (applied by penetrating and superficial processes or with film forming or intumescent fire-retardant coatings) solid wood and wood-based products and woodbased products in which the fire-retardant is incorporated during manufacture. The fire-retardant treated products may be coated with an ordinary paint. Mechanical properties and biological durability of fire-retardant treated wood products are not covered by this European Technical Specification. Paints, coatings and varnishes intended to improve the reaction to fire performance of a construction product when incorporated in the works, i.e. a building, are covered by ETAG 028 [19]. This Technical Specification may be used as a basis for an approval system.

IEC 61010-2-033:2012
Hind 148,08 EUR
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage
IEC 61010-2-033:2012 specifies safety requirements for METERS. The METERS that have a primary purpose of measuring voltage on a live MAINS CIRCUIT are within the scope of this standard. They have various names, but all of them have capability for measurements of voltages on a live MAINS CIRCUIT. Some of the names given to this equipment are as follows:
- MULTIMETER;
- digital MULTIMETER;
- VOLTMETER;
- clamp METER (see also Part 2-032).
For the purpose of this standard, the term METER is used for these HAND-HELD measuring instruments.

This publication is to be read in conjunction with IEC 61010-1:2010.

ISO 11930:2012
Hind 80,62 EUR
Cosmetics -- Microbiology -- Evaluation of the antimicrobial protection of a cosmetic product


ISO 16129:2012
Hind 75,68 EUR
Surface chemical analysis -- X-ray photoelectron spectroscopy -- Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer


EVS-EN ISO 11930:2012
Hind 12,51 EUR
Cosmetics - Microbiology - Evaluation of the antimicrobial protection of a cosmetic product (ISO 11930:2012)
This International Standard comprises: - a preservation efficacy test; - a procedure for evaluating the overall antimicrobial protection of a cosmetic product which is not considered low risk, based on a risk assessment described in ISO 29621. This International Standard provides a procedure for the interpretation of data generated by the preservation efficacy test or by the microbiological risk assessment, or both.

Asendatud või tühistatud standardid

Puuduvad

Kavandite arvamusküsitlus

FprEN 12125
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate
This European Standard is applicable to sodium thiosulfate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of sodium thiosulfate and refers to the corresponding analytical methods. It gives information for its use in water treatment.
Keel: Inglise

FprEN 12123
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Ammonium sulfate
This European Standard is applicable to ammonium sulfate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonium sulfate and refers to the corresponding analytical methods. It gives information on its use in water treatment.
Keel: Inglise

FprEN 15030
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use
This European Standard is applicable to silver nitrate and silver sulfate for the preservation of water intended for human consumption in intermittent applications in water supply plants, including their pipeline networks (small-size plants); water for the preparation of foodstuffs; and other water which is stored in packaged form or kept in enclosed systems (for example, water supply systems in land, water and airborne vehicles). The purpose of adding silver salts is to prevent the detrimental proliferation of microorganisms in water during storage or in enclosed supply systems. This European Standard describes the characteristics of silver salts and specifies the requirements for silver salts and gives reference to the analytical methods. It gives information on their use in water treatment. It also determines the rules relating to safe handling and use of silver salts (see Annex B).
Keel: Inglise

FprEN 1421
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Ammonium chlorid
This European Standard is applicable to ammonium chloride used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonium chloride and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also determines the rules relating to safe handling and use of ammonium chloride (see Annex B).
Keel: Inglise

FprEN 12120
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite
This European Standard is applicable to sodium hydrogen sulfite used for treatment of water intended for human consumption. It describes the characteristics of sodium hydrogen sulfite and specifies the requirements and the corresponding test methods for sodium hydrogen sulfite. It gives information on its use in water treatment.
Keel: Inglise

FprEN 12121
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Sodium disulfite
This European Standard is applicable to sodium disulfite used for treatment of water intended for human consumption. It describes the characteristics of sodium disulfite and specifies the requirements and the corresponding test methods for sodium disulfite. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use (see Annex B).
Keel: Inglise

FprEN 12124
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Sodium sulfite
This European Standard is applicable to sodium used for treatment of water intended for human consumption .It describes the characteristics and specifies the requirements of sodium sulfite and refers to the corresponding analytical methods. It gives information for its use in water treatment.
Keel: Inglise

FprEN 12126
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Liquefied ammonia
This European Standard is applicable to liquefied ammonia used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of liquefied ammonia and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also determines the rules relating to the safe handling and use of liquefied ammonia (see Annex B).
Keel: Inglise

FprEN 12386
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Copper sulfate
This European Standard is applicable to copper (II) sulfate pentahydrate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of copper (II) sulfate pentahydrate and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also determines the rules relating to safe handling and use of copper (II) sulfate pentahydrate (see Annex B).
Keel: Inglise

FprEN 12173
Tähtaeg 30.06.2012
Chemicals used for treatment of water intended for human consumption - Sodium fluoride
This European Standard is applicable to sodium fluoride used for treatment of water intended for human consumption. It describes the characteristics of sodium fluoride and specifies the requirements and the corresponding test methods for sodium fluoride. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use (see Annex B).
Keel: Inglise