79 PUIDUTEHNOLOOGIA

Tagasi peagrupi juurde

Uued standardid

EVS-EN 1870-13:2007+A2:2012
Hind 19,05 EUR
Puidutöötlemismasinate ohutus. Ketassaagimisseadmed. Osa 13: Horisontaalasetusega saeraamid KONSOLIDEERITUD TEKST
This document deals with !all significant hazards", hazardous situations and events as listed in Clause 4 which are relevant to horizontal beam panel sawing machines #where the saw unit of the front cutting line is mounted$ below the workpiece support and which are manually or mechanically loaded and / or unloaded, fitted with: - a side pressure device and / or - the facility for scoring and / or - the facility for post-formed / soft-formed edge pre-cutting and / or - a panel turning device and / or - a pushing out device and / or - pneumatic clamping of the saw blade and / or - a powered panel loading device and / or - a grooving device and / or - additional cutting line(s) inside the machine for longitudinal and / or head cut (before transversal cutting line) and / or - workpiece vacuum clamping as part of a panel turning device or of a panel loading device, hereinafter referred to as "machines" when they are used as intended and under the conditions foreseen by the manufacturer #including reasonably foreseeable misuse$.

EVS-EN 1870-14:2007+A2:2012
Hind 18,00 EUR
Puidutöötlemismasinate ohutus. Ketassaagimisseadmed. Osa 14: Vertikaalasetusega saeraam KONSOLIDEERITUD TEKST
This document !specifies all" significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to manually loaded and unloaded vertical panel sawing (with or without integrated feed) machines fitted with: - the facility for scoring; - an angle cutting device; - a middle support device; - a programmable stop for parallel vertical cuts; - the facility for grooving with a width of at most 20 mm in one pass by using a milling tools, hereinafter referred to as "machines" when they are used as intended and under the conditions foreseen by the manufacturer #including reasonably foreseeable misuse$. The machines are designed for cutting panels of the following materials: a) wood based materials such as chipboard, fibreboard, plywood and also these materials where they are covered with plastic / light alloy laminates; b) solid wood; c) hardened rubber and hardened plastic material; d) non ferrous materials e.g. light alloy; e) compound materials with core consisting of polyurethane or mineral material laminated with light alloy. This document does not apply to vertical panel saws with pressure beam and saw unit mounted behind the workpiece support. This document does not deal with hazards relating to the combination of a single machine being used with any other machine (as part of a line). This document is not applicable to vertical panel saws which are manufactured before the date of its publication as EN.

EVS-EN 325:2012
Hind 5,62 EUR
Puitplaadid. Katsekehade mõõtmete määramine
Käesolev standard sätestab meetodi puitplaatide katsekehade paksuse, pikkuse ja laiuse määramiseks.
This European Standard specifies a method for measuring the thickness, length and width of test pieces of wood-based panels.

EVS-EN 1870-4:2012
Hind 19,05 EUR
Puidutöötlemismasinate ohutus. Ketassaagimisseadmed. Osa 4: Lintsaagimismasinad käsitsi etteande ja/või väljajooksuga
This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary multi-blade rip sawing machines, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse; see also 6.3. This document does not apply to machines with vertical roller feed or vertical chain conveyor feed or machines designed to make the first rip cut on a log. This document does not deal with any hazards relating to the combination of single machines with any other machine as part of a line. This document is not applicable to machines which are manufactured before the date of its publication as EN.

EVS-EN 13629:2012
Hind 12,51 EUR
Puidust põrandakate. Täispuidust üksikud ja eelkoostatud lehtpuulauad
This European Standard specifies the characteristics of individual hardwood boards and pre-assembled hardwood boards with grooves and/or tongues for internal use as flooring. This document covers hardwood boards with or without surface coating. This European Standard does not cover solid parquet elements. (See Annex C).

EVS-EN 1912:2012
Hind 10,19 EUR
Structural Timber - Strength classes - Assignment of visual grades and species
This European Standard lists the visual strength grades, species and sources of timber, and specifies the strength classes to which they are assigned, as documented in EN 338.

Asendatud või tühistatud standardid

EVS-EN 325:2002
Puitplaadid. Katsekehade mõõtmete määramine
Käesolev standard sätestab meetodi puitplaatide katsekehade paksuse, pikkuse ja laiuse määramiseks.
This European standard specifies a method for measuring the thickness, lenght and width of test pieces of wood-based panels.
Keel: Eesti, Inglise

EVS-EN 13629:2005
Puidust põrandakate - Massiivpuidust eelkoostatud lehtpuulaud
Käesolev Euroopa standard määrab kindlaks sisetingimustes põrandakattena kasutatavate massiivpuidust sulundi ja soonega eelkoostatud lehtpuu põrandalaudade näitajad. Käesolev standard kehtib pinnatöötlusega ja pinnatöötluseta massiivpuidust eelkoostatud lehtpuulaudadele.
This European standard specifies the characteristics of solid pre-assembled hardwood boards with grooves and/or tongues for internal use as flooring. This standard covers solid hardwood pre-assembled boards with or without surface treatment
Keel: Eesti, Inglise

EVS-EN 13629:2005/AC:2007
Puidust põrandakate. Massiivpuidust eelkoostatud lehtpuulaud

Keel: Inglise

EVS-EN 1870-4:2001+A1:2009
Puidutöötlemismasinate ohutus. Ketassaagimisseadmed. Osa 4: Lintsaagimismasinad käsitsi etteande ja/või väljajooksuga KONSOLIDEERITUD TEKST
This European Standard does not apply to machines with vertical roller feed or vertical chain conveyor feed or machines designed to make the first rip cut on a log. For Computer Numerically Controlled machines (CNC) this European Standard does not cover hazards related to electromagnetic compatibility (EMC). This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard.
Keel: Inglise

EVS-EN 1870-13:2007+A1:2009
Puidutöötlemismasinate ohutus. Ketassaagimisseadmed. Osa 13: Horisontaalasetusega saeraamid KONSOLIDEERITUD TEKST
This document deals with !all significant hazards", hazardous situations and events as listed in Clause 4 which are relevant to horizontal beam panel sawing machines where the saw unit is mounted below the workpiece support and which are manually or mechanically loaded and / or unloaded, fitted with: - a side pressure device and / or - the facility for scoring and / or - the facility for post-formed / soft-formed edge pre-cutting and / or - a panel turning device and / or - a pushing out device and / or - pneumatic clamping of the saw blade and / or - a powered panel loading device and / or - a grooving device and / or - additional cutting line(s) inside the machine for longitudinal and / or head cut (before transversal cutting line) and / or - workpiece vacuum clamping as part of a panel turning device or of a panel loading device, hereinafter referred to as "machines" when they are used as intended and under the conditions foreseen by the manufacturer.
Keel: Inglise

EVS-EN 1870-14:2007+A1:2009
Puidutöötlemismasinate ohutus. Ketassaagimisseadmed. Osa 14: Vertikaalasetusega saeraam KONSOLIDEERITUD TEKST
This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to manually loaded and unloaded vertical panel sawing (with or without integrated feed) machines fitted with: - the facility for scoring; - an angle cutting device; - a middle support device; - a programmable stop for parallel vertical cuts; - the facility for grooving with a width of at most 20 mm in one pass by using a milling tools, hereinafter referred to as "machines" when they are used as intended and under the conditions foreseen by the manufacturer.
Keel: Inglise

EVS-EN 1912:2005+A4:2010
Structural timber - Strength classes - Assignment of visual grades and species KONSOLIDEERITUD TEKST
This document lists visual strength grades, species and sources of timber, and specifies the strength classes from EN 338, to which they are assigned. NOTE For the grades, species and sources included, there is long experience of use and/or satisfactory test data. The sources listed are therefore largely determined by existing commercial practice.
Keel: Inglise

Kavandite arvamusküsitlus

EN 848-1:2007+A1:2010/FprA2
Tähtaeg 30.06.2012
Puidutöötlemismasinate ohutus. Ühepoolsed pöörleva lõiketeraga puidutöötluspingid. Osa 1: Ühespindlilised vertikaalsed puidutöötluspingid
This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable hand fed single spindle vertical moulding machines (with or without demountable power feed unit), herein after referred to as "machines", designed to cut solid wood, chip board, fibreboard, plywood and also these materials if they are covered with plastic laminate or edgings when they are used as intended and under the conditions foreseen by the manufacturer.
Keel: Inglise

EN 848-2:2007+A1:2010/FprA2
Tähtaeg 30.06.2012
Puidutöötlusmasinate ohutus. Ühepoolsed pöörleva lõiketeraga puidutöötluspingid. Osa 2: Ühespindlilised käsitsi- ja kombineeritud etteandega vertikaalfreespingid
This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable single spindle hand fed/integrated fed routing machines with fixed head but allowing only movement along the axis of the tool during machining hereinafter referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials if they are covered with plastic laminate, edgings or veneer when they are used as intended and under the conditions foreseen by the manufacturer.
Keel: Inglise