Skip to main content
Back

EVS-EN 124-2:2015

Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron

General information

Valid from 02.07.2015
Base Documents
EN 124-2:2015
Directives or regulations
None

Standard history

Status
Date
Type
Name
02.07.2015
Main
01.01.2000
Main
This European Standard is applicable to gully tops and manhole tops made of flake graphite cast iron and/or
spheroidal graphite cast iron whether in combination with concrete or not, with a clear opening up to and
including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas
subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in
— areas which can only be used by pedestrians and pedal cyclists (at least class A 15),
— pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125),
— the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum
of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250),
— carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of
road vehicles (at least class D 400),
— areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600),
— areas imposing particularly high wheel loads, e.g. aircraft pavements (class F 900).
This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives
guidance for combinations of covers/grating made of cast iron with frames according to EN 124-3, EN 124-4,
EN 124-5 or EN 124-6.
This European Standard is not applicable to:
— cover fillings installed on site, e.g. concrete, paving blocks, etc.;
— concave gratings for class D 400 installed in carriageways of roads or hard shoulders and concave
gratings for classes F 900 and E 600;
— gratings/covers as part of prefabricated drainage channels according to EN 1433;
— floor and roof gullies in buildings which are specified in EN 1253 (all parts); and
— surface boxes.

Required fields are indicated with *

*
*
*
PDF
24.40 € incl tax
Paper
24.40 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 124-1:2015

Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
Newest version Valid from 02.07.2015
Main

EVS-EN 124-3:2015

Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
Newest version Valid from 02.07.2015
Main

EVS-EN 124-4:2015

Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
Newest version Valid from 02.07.2015
Main

EVS-EN 124-5:2015

Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
Newest version Valid from 02.07.2015