Esileht»Infoteenus

53 TÕSTE- JA TEISALDUS-SEADMED

Tagasi peagrupi juurde

Uued standardid


Puuduvad

Asendatud või tühistatud standardid


Puuduvad

Kavandite arvamusküsitlus


EN 474-1:2006+A4:2013/FprA5
Tähtaeg 16.08.2017
Earth-moving machinery - Safety - Part 1: General requirements
This European Standard specifies the general safety requirements for earth-moving machinery ) described in EN ISO 6165:2006, except rollers and horizontal directional drill. NOTE 1 Rollers are covered by EN 500. NOTE 2 Horizontal directional drills are covered by EN 791. This European Standard also applies to derivative machinery (see 3.1.2) designed primarily for use with equipment to loosen, pick-up, move, transport, distribute and grade earth and rock. This European Standard gives the common safety requirements for earth-moving machinery families and is intended to be used in conjunction with one of the EN 474 parts 2 to 12. These machine specific parts EN 474-2 to -12 do not repeat the requirements from EN 474-1:2006+A1:2009, but add or replace the requirements for the family in question. NOTE 3 The requirements specified in this part of the standard are common to two or more families of earth- moving machinery. This part gives specific requirements for demolition machinery. Specific requirements in EN 474 parts 2 to 12 take precedence over the respective requirements of EN 474-1:2006+A1:2009. For multipurpose machinery the parts of the standard that cover the specific functions and applications have to be used e.g. a compact loader also used as a trencher shall use the relevant requirements of EN 474 parts 1, 3 and 10. The standard also covers general requirements for attachments intended to be used with earth moving machine families covered in the scope. Except for part 12 this European Standard does not deal with the electrical hazards related to the main circuits and drives of machinery when the principal source of energy is electrical. This European Standard does not deal with towing of trailers. This European Standard deals with all significant hazards, hazardous situations and events relevant to earth-moving machinery, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of earth-moving machinery. This European Standard is not applicable to earth moving machines, which are manufactured before the date of publication of this European Standard by CEN.
Keel: Inglise

prEN 16842-3
Identne prEN 16842-3
Tähtaeg 16.08.2017
Powered industrial trucks - Visibility - Test method and verification - Part 3: Reach trucks up to and including 10 000 kg
This European Standard specifies the requirements and test procedures for 360° visibility of reach trucks with a sit-on or stand-on operator, without load (herein referred to as truck), with a capacity up to and including 10 000 kg in accordance with ISO 5053 1 and is intended to be used in conjunction with FprEN 16842-1. Where specific requirements in this part are modified from the general requirements i FprEN 16842-1, the requirements of this part are truck specific and to be used for reach trucks with a sit-on or stand-on operator with a capacity ≤ 10 000 kg. This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events as listed in Annex ZA, Table ZA.1, relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
Keel: Inglise

prEN 16842-4
Identne prEN 16842-4
Tähtaeg 16.08.2017
Powered industrial trucks- Visibility - Test methods and verification - Part 4 : Industrial variable reach trucks up to and including 10 000 kg capacity
This European Standard specifies the requirements and test procedures of 360° visibility of sit on self-propelled variable reach industrial counterbalance trucks (herein after referred to as truck) with a capacity ≤ 10 000 kg in accordance with ISO 5053-1 and is intended be used in conjunction with FprEN 16842-1. Where specific requirements in this part are modified from the general requirements in FprEN 16842-1, the requirements of this part are truck specific and to be used for self-propelled industrial order-picking, lateral- and front-stacking trucks with elevating operator position. This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events as listed in Annex ZA, Table ZA.1, relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
Keel: Inglise

prEN 16842-6
Identne prEN 16842-6
Tähtaeg 16.08.2017
Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
This European Standard specifies the requirements and test procedures for 360° visibility of sit-on self-propelled industrial counterbalance trucks and rough terrain masted trucks (herein referred to as truck) with a capacity greater than 10 000 kg in accordance with ISO 5053-1 and is intended to be used in conjunction with FprEN 16842-1. Where specific requirements in this part are modified from the general requirements in FprEN 16842-1, the requirements of this part are truck specific and to be used for sit-on self-propelled industrial counterbalance trucks and rough terrain masted trucks with a capacity greater than 10 000 kg. This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events as listed in Annex ZA, Table ZA.1, relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
Keel: Inglise

prEN 16842-7
Identne prEN 16842-7
Tähtaeg 16.08.2017
Powered industrial trucks - Visibility - Test method for verification - Part 7: Variable reach and masted container trucks handling freight containers of 6 m length and longer
This European Standard specifies the requirements and test procedures for 360° visibility of sit-on self-propelled industrial variable reach truck and masted trucks (herein referred to as truck) specifically designed for the transport of freight containers of 6 m length and longer, equipped with a spreader in accordance with ISO 5053-1 and is intended to be used in conjunction with FprEN 16842-1. Where specific requirements in this part are modified from the general requirements in FprEN 16842-1, the requirements of this part are truck specific and to be used for sit-on self-propelled industrial variable reach truck and masted trucks handling freight containers. This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events as listed in Annex ZA, Table ZA.1, relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. This standard does not apply to trucks equipped with forks.
Keel: Inglise