Esileht»Infoteenus

97 OLME. MEELELAHUTUS. SPORT

Tagasi peagrupi juurde

Uued standardid


EVS-EN 13200-1:2019
Hind 13,92 EUR
Identne EN 13200-1:2019
Spectator facilities - Part 1: General characteristics for spectator viewing area
This document specifies design and management requirements for spectator facilities at permanent or temporary entertainment venues including sport stadia, sport halls, indoor and outdoor facilities for the purpose of enabling their functionality. This document is not applicable to other permanent venues such as theatres, cinemas, opera houses, auditoriums, lecture halls and similar places where persons congregate. NOTE Provisions for media facilities are not included in this document.

EVS-EN 131-6:2019
Hind 11,67 EUR
Identne EN 131-6:2019
Redelid. Osa 6: Teleskoopredelid
This document specifies the general design features, requirements and test methods and defines terms for leaning and standing telescopic ladders. Ladders with extension elements are not covered by this part of EN 131. This part of the standard is intended to be used in conjunction with EN 131 1, EN 131 2, EN 131 3 and if applicable EN 131 4.

EVS-EN ISO 17201-3:2019
Hind 19,05 EUR
Identne ISO 17201-3:2019; EN ISO 17201-3:2019
Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations (ISO 17201-3:2019)
This document specifies methods of predicting the sound exposure level of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from the sound exposure level. The prediction is based on the angular source energy distribution of the muzzle blast as defined in ISO 17201-1 or calculated using values from ISO 17201-2. This document applies to weapons with calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent, at distances where peak pressures, including the contribution from projectile sound, are less than 1 kPa (154 dB). NOTE National or other regulations, which could be more stringent, can apply.

ISO 20318-1:2019
Hind 51,61 EUR
Mechanical pencils and leads for general use -- Classification, dimensions, quality and test methods -- Part 1: Mechanical pencils
This document specifies classification, dimensions, quality and test methods for hand-held mechanical pencilss which hold and feed out a lead, and are used for general writing. It is also applicable to multi-function pens equipped with a mechanical pencil unit. However, those pencils attached to machinery instruments such as a plotter are excluded.

ISO 20318-2:2019
Hind 51,61 EUR
Mechanical pencils and leads for general use -- Classification, dimensions, quality and test methods -- Part 2: Black leads
This document specifies classification, dimensions, quality and test methods for black leads used for mechanical pencils for general writing, as specified in ISO 20318-1.

ISO 13993:2019
Hind 78,30 EUR
Rental ski shop practice -- Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications
This document specifies a uniform method for the sampling and inspection of complete and incomplete alpine ski-binding-boot systems used in rental operations. This document is intended for any facility which rents complete and incomplete alpine ski-binding-boot systems as for example when the skier owns the boots. This document is not applicable for alpine touring ski-binding-boot systems. This document is not applicable for complete and incomplete alpine ski-binding-boot systems which are rented for 15 days or more. NOTE 1 A period of less than 15 days is common for equipment being rented. NOTE 2 ISO 11088 gives a method for testing if the equipment is owned or rented for 15 days or more.
Asendab ISO 13993:2001

ISO 8124-4:2014/Amd 2:2019
Hind 14,24 EUR
ISO 8124-4:2014 - Amendment
Amendment to ISO 8124-4:2014

Asendatud või tühistatud standardid


EVS-EN ISO 17201-3:2010
Identne ISO 17201-3:2010; EN ISO 17201-3:2010
Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations
This part of ISO 17201 specifies methods of predicting sound exposure levels of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from the sound exposure level. The prediction is based on the angular source energy distribution of the muzzle blast as defined in ISO 17201-1 or calculated using values from ISO 17201-2. This part of ISO 17201 applies to weapons with calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent, at distances where peak pressures, including the contribution from projectile sound, are less than 1 kPa (154 dB).
Keel: Inglise

EVS-EN 13200-1:2012
Identne EN 13200-1:2012
Spectator facilities - Part 1: General characteristics for spectator viewing area
This European Standard specifies design and management requirements for spectator facilities at permanent or temporary entertainment venues including sport stadia, sport halls, indoor and outdoor facilities for the purpose of enabling their functionality. This European Standard is not applicable to other permanent venues such as theatres, cinemas, opera houses, auditoriums, lecture halls and similar places where persons congregate. NOTE Provisions for media facilities are not included in this standard.
Keel: Inglise

EVS-EN 131-6:2015
Identne EN 131-6:2015
Ladders - Part 6: Telescopic ladders
This European Standard specifies the general design features, requirements and test methods and defines terms for leaning and standing telescopic ladders. Ladders with extension elements are not covered by this part of EN 131. This part of the standard is intended to be used in conjunction with EN 131-1:2007+A1:2011, EN 131 2:2010+A1:2012, EN 131-3:2007 and if applicable EN 131-4:2007.
Keel: Inglise
Asendatud EVS-EN 131-6:2019

Kavandite arvamusküsitlus


prEN IEC 61591:2019/prAA
Tähtaeg 15.05.2019
Cooking fume extractors - Methods for measuring performance
Common modification for prEN IEC 61591:2019
Keel: Inglise