Skip to main content
Tagasi

EVS-EN 14276-1:2006+A1:2011

Külmutussüsteemide ja küttepumpade survesüsteemid. Osa 1: Anumad. Üldnõuded

Üldinfo

Kehtetu alates 19.03.2020
Alusdokumendid
EN 14276-1:2006+A1:2011
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
19.03.2020
Põhitekst
05.04.2011
Põhitekst + muudatus
Põhitekst
EVS-EN 14276-1:2006
This European Standard specifies the requirements for material, design, manufacturing, testing and documentation for stationary pressure vessels intended for use in refrigerating systems and heat pumps. These systems are referenced in this standard as refrigerating systems as defined in EN 378-1. This European Standard applies to vessels including welded or brazed attachments up to and including the nozzle flanges, screwed, welded or brazed connectors or to the edge to be welded or brazed at the first circumferential joint connecting piping or other elements. This European Standard applies to pressure vessels with an internal pressure down to – 1 bar, to account for the evacuation of the vessel prior to charging with refrigerant. This European Standard applies to both the mechanical loading conditions and thermal conditions as defined in EN 13445-3 associated with refrigerating systems. It applies to pressure vessels subject to the maximum allowable temperatures for which nominal design stresses for materials are derived using EN 13445-2 and EN 13445-3 or as specified in this standard. In addition vessels designed to this standard should have a maximum design temperature not exceeding 200 °C and a maximum design pressure not exceeding 64 bars. Outside of these limits, it is important that EN 13445 be used for the design, construction and inspection of the vessel. Under these circumstances it is important that the unique nature of refrigerating plant, as indicated in the introduction to this standard, also be taken into account.

Nõutud väljad on tähistatud *

*
*
*
PDF
39,04 € koos KM-ga
Paber
39,04 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst + muudatus

EVS-EN 14276-2:2007+A1:2011

Külmutussüsteemide ja küttepumpade survesüsteemid. Osa 2: Torustikud. Üldnõuded
Kehtetu alates 19.03.2020
Muudatus

EVS-EN 60335-2-40:2003/A2:2009

Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-40: Erinõuded elektrilistele soojuspumpadele, kliimaseadmetele ja õhukuivatitele
Kehtetu alates 15.05.2023
Muudatus

EVS-EN 60335-2-40:2003/A1:2006

Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-40: Erinõuded elektrilistele soojuspumpadele, kliimaseadmetele ja õhukuivatitele
Kehtetu alates 15.05.2023
Muudatus

EVS-EN 60335-2-40:2003/A12:2005

Majapidamis- ja muud taolised elektriseadmed. Ohutus. Osa 2-40: Erinõuded elektrilistele soojuspumpadele, kliimaseadmetele ja õhukuivatitele
Kehtetu alates 15.05.2023