Back

EVS-EN 1870-15:2012

Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

General information
Valid from 06.11.2012
Base Documents
EN 1870-15:2012
Directives or regulations
2006/42/EC Machinery (MD)
Standard history
Status
Date
Type
Name
06.11.2012
Main
Main + amendment
This European Standard specifies all requirements and/or measures to reduce the hazards and limit the risks on multi-blade cross-cut sawing machines (with minimum two saw unit) with integrated feed of the work-piece and manual loading and/or unloading fitted with a saw blade drive motor for each saw unit, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This document deals with all significant hazards, hazardous situations and events which are relevant to these machines as stated in Clause 4. It does not deal with any hazards relating to the mechanical loading and/or unloading of the work-piece or which result from the combination of the machine with any other. This document does not cover machines designed for climb cutting (see 3.2.10). The requirements of this document apply to all machines whatever their method of control e.g. electromechanical and/or electronic and/or pneumatic. This document is not applicable to multi-blade cross-cut sawing machines with integrated feed of the work-piece and manual loading and/or unloading which are manufactured before the date of its publication as EN. NOTE Machines covered by this document are listed under 1.3 of Annex IV of the Machinery Directive.
*
*
*
PDF
20.50 € incl tax
Paper
20.50 € incl tax
Browse a standard: 2.40 € incl tax
Standard monitoring
Customers who bought this item also bought
Main

EVS-EN 289:2014

Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
Newest version Valid from 04.08.2014
Main

EVS-EN ISO 14119:2013

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)
Newest version Valid from 14.11.2013
Main

EVS-EN IEC 61800-3:2018

Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
Newest version Valid from 18.09.2018
Main

EVS-EN ISO 14122-1:2016

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
Newest version Valid from 05.07.2016