Back

EVS-EN 62262:2008+A1:2021

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) (IEC 62262:2002 + IEC 62262:2002/AMD1:2021)

General information
Valid from 15.12.2021
Base Documents
IEC 62262:2002; EN 62262:2002; IEC 62262:2002/AMD1:2021; EN 62262:2002/A1:2021
Directives or regulations
None
Standard history
Status
Date
Type
Name
15.12.2021
Main + amendment
01.11.2021
Amendment
05.09.2008
Main
This document refers to the classification of the degrees of protection provided by enclosures against external mechanical impacts when the rated voltage of the protected equipment is not greater than 72,5 kV. The object of this document is to give a) the definitions for the degrees of protection provided by enclosures of electrical equipment as regards protection of the equipment inside the enclosure against harmful effects of mechanical impacts; b) the designations for the degrees of protection; c) the requirements for each designation; d) the tests to be performed to verify that the enclosure meets the requirements of this document. It will remain the responsibility of individual technical committees to decide on the extent and manner in which the classification is used in their standards and to define the "enclosure" as it applies to their equipment and to ensure that for a given classification, the tests do not differ from those specified in this document. If necessary, complementary requirements can be included in the relevant product standard. For a particular type of equipment, a product committee can specify different requirements provided that at least the same level of safety is ensured. This document deals only with enclosures that are in all other respects suitable for their intended use as specified in the relevant product standard and which, from the point of view of materials and workmanship, ensure that the claimed degrees of protection are maintained under the normal conditions of use.
*
*
*
PDF
10.46 € incl tax
Paper
10.46 € incl tax
Browse a standard: 2.40 € incl tax
Standard monitoring
Customers who bought this item also bought
Main

EVS-EN 62196-1:2014

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
Newest version Valid from 12.01.2015
Main

EVS-EN 62196-2:2017

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
Newest version Valid from 16.05.2017
Main

EVS-EN 60068-2-6:2008

Environmental testing -- Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
Newest version Valid from 07.04.2008
Main

EVS-EN 60068-2-78:2013

Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state (IEC 60068-2-78:2012)
Newest version Valid from 05.08.2013