Back

EVS-EN IEC 61010-2-030:2021+A11:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits (IEC 61010-2-030:2017)

General information
Valid from 03.05.2021
Base Documents
IEC 61010-2-030:2017; EN IEC 61010-2-030:2021; EN IEC 61010-2-030:2021/A11:2021
Directives or regulations
None
Standard history
Status
Date
Type
Name
03.05.2021
Main + amendment
15.04.2021
Main
This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. This part of IEC 61010 specifies safety requirements for equipment having testing or measuring circuits which are connected for test or measurement purposes to devices or circuits outside the measurement equipment itself. These include measuring circuits which are part of electrical test and measurement equipment, laboratory equipment, or process control equipment. The existence of these circuits in equipment requires additional protective means between the circuit and an OPERATOR. NOTE These testing and measuring circuits can, for example: – measure voltages in circuits of other equipment, – measure temperature of a separate device via a thermocouple, – measure force on a separate device via a strain gauge, – inject a voltage onto a circuit to analyse a new design. Equipment having these testing and measuring circuits may be intended for performing tests and measurements on hazardous conductors, including MAINS conductors and telecommunication network conductors. See Annex BB for considerations of HAZARDS involved in various tests and measurements.
*
*
*
PDF
20.50 € incl tax
Paper
20.50 € incl tax
Price: 2.40 € incl tax
Standard monitoring
Customers who bought this item also bought
Main + amendment

EVS-EN IEC 61010-2-034:2021+A11:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength (IEC 61010-2-034:2017)
Newest version Valid from 03.05.2021
Main + amendment

EVS-EN 50470-3:2007+A1:2019

Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C)
Newest version Valid from 15.02.2019
Main + amendment

EVS-EN 61000-4-5:2014+A1:2017

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
Newest version Valid from 15.11.2019
Main + corrigendum

EVS-HD 60364-4-442:2012

Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
Newest version Valid from 03.02.2012