Back

ISO 11296-7:2019

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes

General information
Valid from 11.01.2019
Directives or regulations
None

Standard history

Status
Date
Type
Name
11.01.2019
Main
26.10.2011
Main
This document, in conjunction with ISO 11296-1, specifies requirements and test methods for pipes which are formed on site by spirally winding and jointing a pre-manufactured profiled plastics strip, or a profiled plastics strip and integral locking joiner strip, and used for the renovation of underground non-pressure drainage and sewerage networks.
It applies to spirally-wound pipes of fixed or variable diameter made of profiled plastics strips, with or without steel stiffening elements, and installed by one of two methods.
The first method employs a dedicated winding machine in front of the open end of an existing pipeline, e.g. in a manhole. The pipes thus formed are simultaneously inserted into the existing pipeline by the winding forces, and by certain techniques can also be expanded in diameter after or during insertion.
The second method employs a dedicated winding machine which forms the pipe as it traverses the existing pipeline from one manhole to the next.
It applies to profiled plastics strips of unplasticized poly(vinyl chloride) (PVC U) with integral locking mechanism, or of high density polyethylene (HDPE) with integrally welded joints.
*
*
*
PDF
125.87 € incl tax
Paper
125.87 € incl tax
Standard monitoring