Back

ISO 12003-2:2008

Agricultural and forestry tractors -- Roll-over protective structures on narrow-track wheeled tractors -- Part 2: Rear-mounted ROPS

General information
Withdrawn from 11.06.2021
Directives or regulations
None
Standard history
Status
Date
Type
Name
11.06.2021
Main
23.07.2008
Main
Main
ISO 12003-2:2002
ISO 12003-2:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll bar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics. A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential). A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle. A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
*
*
*
PDF
64.44 € incl tax
Paper
64.44 € incl tax
Standard monitoring