Back
NEW

ISO 23655-2:2022

Water quality — Nickel-59 and nickel-63 — Part 2: Test method using ICP-MS

General information
Valid from 02.09.2022
Directives or regulations
None
Standard history
Status
Date
Type
Name
02.09.2022
Main
This document specifies the determination of nickel-59 and nickel-63 (59Ni and 63Ni) activity concentration in samples of all types of water using inductively coupled plasma mass spectrometry (ICP-MS). Using currently available ICP-MS, this test method can measure 59Ni activity concentrations of 300 mBq⋅l−1 and 63Ni activity concentrations of 200 Bq⋅l−1. These values can be achieved with a sample volume of 1,0 l. Higher activity concentrations can be measured by either diluting the sample or using smaller sample aliquots or both. NOTE       These performance indicators are wholly dependent on the measurement regimes in individual laboratories; in particular, the detection limit is influenced by amount of stable nickel present. The range of application depends on the amount of dissolved material in the water and on the performance characteristics of the measurement equipment (background count rate and counting efficiency). It is the laboratory’s responsibility to ensure the suitability of this test method for the water samples tested.
*
*
*
PDF
101.81 € incl tax
Paper
101.81 € incl tax
Standard monitoring