Back

ISO 4152:2021

Glass‐reinforced thermosetting plastics (GRP) pipes — Determination of the apparent axial long‐term modulus of pipes subject to beam bending

General information
Valid from 19.05.2021
ICS Groups
23.040.20 Plastics pipes
Directives or regulations
None

Standard history

Status
Date
Type
Name
19.05.2021
Main
ISO 4152:2021
This document specifies a method for determining the apparent axial long-term modulus of pipes subject to beam bending deflection between vertically supported end-couplers, which allow rotation of the pipe relative to the couplers.
In conjunction with ISO 10928, this document expresses the results of the test as an apparent axial long-term modulus for use in the calculation of mid-span beam deflection and end rotation of GRP pipes as specified in ISO/TS 10986.
Test conditions and requirements are specified in the referring standard.
For practical reasons, the test method is not suited for diameters greater than DN 600.
*
*
*
PDF
82.61 € incl tax
Paper
82.61 € incl tax
Standard monitoring
English

Related products

Main

EVS-EN 13598-2:2020

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
Newest version Valid from 02.06.2020
Main

EVS-EN 13598-2:2016

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
Withdrawn from 02.06.2020
Main + amendment

EVS-EN 12201-2:2011+A1:2013

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
Withdrawn from 15.02.2024
Main

EVS-EN 12007-2:2012

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
Newest version Valid from 05.09.2012

Standards designation

EVS Estonian standard
EN European standard (published by an CEN or CENELEC)
EN ISO International standard adopted as an European standard
ISO International Organization for Standardization’s standard
IEC International Electrotechnical Commission’s standard
HD CENELEC’s harmonisation document
   
EVS-EN European standard implemented in Estonia
EVS-EN ISO International standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IEC International standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IEC International electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
   
A, AMD amedment
+A a full standard plus the amendment
/A only amendment
COR, AC corrigendum
+COR a full standard plus the corrigendum
NA national annex
+NA a full standard plus the national annex
/NA only national annex
TS technical specification
TR technical report
CWA agreement, developed by a CEN or CENELEC
prEVS-EN (etc) draft standard
   
et the standard is in Estonian only
en the standard is in English only
et-en the standard is in Parallel text Estonian-English

Contact

standard@evs.ee
+372 605 5060
Akadeemia tee 21/6, Tallinn, 12618, Estonia
Reg. code 80120020
Eesti Standardimis- ja Akrediteerimiskeskus MTÜ
E-N 8:30-17:00 R 8:30-16:00

Assistance in ordering

Direct links

Mastercard
Visa
Paypal
Swedbank
SEB
Luminor
LHV
Copyright © 2024 EVS. All rights reserved.