Back

prEN 13481-2

Railway Applications - Track - Performance Requirements for Fastening Systems - Part 2: Fastening systems for concrete sleepers in ballast

General information
Draft
Base Documents
prEN 13481-2
Directives or regulations
None
Standard history
Status
Date
Type
Name
03.02.2017
Main + amendment
This European Standard is applicable to fastening systems in Categories A–E as specified in EN 13481-1:2012, 3.1, for use on concrete sleepers in ballasted track with maximum axle loads, and minimum curve radii as shown in Table 1. The requirements apply to: - fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; - fastening systems with dynamic stiffness, kLFA, not less than 50 MN/m; - fastening systems for rail sections included in EN 13674-1 (excluding 49E4) or EN 13674-4. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints. This standard should only be used for type approval of complete fastening systems.
*
*
*
PDF
5.70 € incl tax
Paper
5.70 € incl tax
Standard monitoring