The present document specifies the applicable test conditions, performance assessment and performance criteria technical characteristics, test methods and methods of measurement for the assessment of Private land Mobile Radio (PMR) and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC).
The present document covers both analogue and digital Private land Mobile Radio (PMR) equipment as well as Terrestrial Trunked Radio (TETRA).
Technical specifications related to the antenna port and emissions from the enclosure port of the equipment are outside of the scope of the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum, see Table 1.
Emissions requirements in the present document are specified for frequencies above 9 kHz.
Table 1: Radio Technologies in scope of the present document
Technology; ETSI Standard
Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; ETSI EN 302 561
Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; ETSI EN 300 086
Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; ETSI EN 300 219
Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; ETSI EN 300 113
Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; ETSI EN 300 296
Land Mobile Service; Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; ETSI EN 300 341
Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; ETSI EN 300 390
Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; ETSI EN 301 166
TETRA radio equipment using non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard for access to radio spectrum; ETSI EN 303 758
NOTE 1: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU is given in annex A.
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio equipment are not included in the present document.
NOTE 2: Such technical specifications are normally found in the relevant product family standards for AC mains powered equipment (e.g. EN 61000-3-2 and EN 61000-3-3).
The environmental classification as per ETSI EN 301 489-1 applies.
Required fields are indicated with *