Tagasi

EVS-EN 10139:2016+A1:2020

Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions

Üldinfo
Kehtiv alates 15.04.2020
Alusdokumendid
EN 10139:2016+A1:2020
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
15.04.2020
Põhitekst + muudatus
02.03.2016
Põhitekst
1.1 This European Standard applies to cold rolled narrow strip in coils and cut lengths in thicknesses up to 10 mm and of widths less than 600 mm, made from low carbon, unalloyed and alloyed steels in accordance with Table 1. These products are suitable for cold forming. They are also suitable for surface coating. On the other hand, they are not suitable for hardening treatment followed by tempering. 1.2 This European Standard does not cover cold rolled flat products for which a separate standard already exists, particularly the following products: - cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state (EN 10106); - grain-oriented electrical steel sheet and strip delivered in the fully processed state (EN 10107); - cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state (EN 10341); - cold rolled narrow steel strip for heat treatment (EN 10132 1 to −4); - cold rolled steel flat products with higher yield strength for cold forming (EN 10268); - cold rolled low carbon steel flat products for cold forming (EN 10130); - cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel (EN 10205); - cold rolled low carbon steel flat products for vitreous enamelling (EN 10209).
*
*
*
PDF
10,46 € koos KM-ga
Paber
10,46 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN 1706:2020

Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Uusim versioon Kehtiv alates 04.05.2020
Põhitekst

EVS-EN 1676:2020

Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
Uusim versioon Kehtiv alates 04.05.2020
Põhitekst

EVS-EN ISO 3506-1:2020

Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)
Uusim versioon Kehtiv alates 04.05.2020
Põhitekst

EVS-EN ISO 3506-2:2020

Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)
Uusim versioon Kehtiv alates 04.05.2020