Tagasi

EVS-EN 13898:2003+A1:2009

Tööpingid. Ohutus. Seadmed külmmetalli saagimiseks KONSOLIDEERITUD TEKST

Üldinfo
Kehtetu alates 03.05.2017
Alusdokumendid
EN 13898:2003+A1:2009
Tegevusala (ICS grupid)
25.080.60 Saagimispingid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.05.2017
Põhitekst
06.04.2010
Parandus
03.04.2009
Põhitekst + muudatus
Põhitekst
EVS-EN 13898:2003
1.1  This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting–up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade. 1.2  This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal operation and unexpected or unintended starting. 1.3  This standard applies to the ancillary devices which form an integral part of the machine. Where such devices are not an integral part of the machine, the designer, manufacturer or supplier of the installation should take into account their intended use, and should make provision for the safe linking of such devices with the machine. 1.4  This standard applies to (metal) sawing machines which are manufactured after the date of publication by CEN of this standard.
*
*
*
PDF
28,06 € koos KM-ga
Paber
28,06 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 1870-11:2013

Puidutöötlemismasinate ohutus. Ketassaagmasinad. Osa 11: Poolautomaatsed horisontaalsed ühesaelised ristisaagimise masinad (suportsaed)
Uusim versioon Kehtiv alates 14.11.2013
Põhitekst + muudatus

EVS-EN 415-1:2000+A1:2009

Pakkemasinate ohutus. Osa 1: Pakkemasinate ja tarvikute terminoloogia ja klassifikatsioon KONSOLIDEERITUD TEKST
Kehtetu alates 04.08.2014
Põhitekst + muudatus

EVS-EN 415-5:2006+A1:2009

Pakkemasinate ohutus. Osa 5: Pakendamismasinad KONSOLIDEERITUD TEKST
Uusim versioon Kehtiv alates 06.01.2010
Põhitekst + muudatus

EVS-EN 547-1:1999+A1:2008

Masinate ohutus. Inimkeha mõõtmed. Osa 1: Kogu keha läbimahtumist võimaldavate masinaruumiavade mõõtmete määramise põhimõtted KONSOLIDEERITUD TEKST
Uusim versioon Kehtiv alates 07.11.2008