Tagasi

Vabandust – see toode pole enam saadaval

EVS-EN 15746-1:2010

Raudteealased rakendused. Rööbastee. Maanteel ja raudteel liikuvad masinad ning juurdekuuluv lisavarustus. Osa 1: Tehnilised nõuded liikumiseks ja tööks

Üldinfo
Kehtetu alates 02.11.2011
Alusdokumendid
EN 15746-1:2010
Tegevusala (ICS grupid)
93.100 Raudtee-ehitus
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
02.11.2011
Põhitekst + muudatus
Põhitekst
EVS-EN 15746-1:2010
This European Standard deals with the technical requirements to minimize the specific railway hazards of self propelled road-rail machines – henceforward referred to as machines – and associated equipment, which can arise during the commissioning, the operation and the maintenance of machines when carried out in accordance with the specification given by the manufacturer or his authorised representative. Part 1 of EN 15746 defines requirements for approval of the machine by an authorised body; Part 2 defines requirements for the machine to be declared conformant by the manufacturer, except in the case of machines classified under Annex 4 of the Machinery Directive, which require a conformity check in conjunction with a notified body. Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilizing other than adhesion between the rail and rail wheels and underground infrastructures. This European Standard is also applicable for machines and associated equipment that in working configuration are partly supported on the ballast or the formation. This European Standard does not apply to the following: - the requirements for quality of the work or performance of the machine; - the specific requirements established by the machine operator for the use of machines, which will be the subject of negotiation between the manufacturer and the infrastructure manager; - running and working whilst not on rails; - separate machines temporarily mounted on machines and associated equipment; - demountable machines as defined in 3.2; - trailers as defined in 3.3, including road-rail trailers. This European Standard does not establish the additional requirements for the following: - operation subject to special rules, e.g. potentially explosive atmospheres; - hazards due to natural causes, e.g. earthquake, lightning, flooding; - working methods; - operation in severe working conditions requiring special measures, e.g. work in tunnels or in cuttings, extreme environmental conditions such as: freezing temperatures, high temperatures, corrosive environments, tropical environments, contaminating environments, strong magnetic fields; - hazards due to errors in software; - hazards occurring when used to handle suspended loads which may swing freely. Other track construction and maintenance machines used on railway tracks are dealt with in other European Standards, see Annex G.
*
*
*
PDF
25,30 € koos KM-ga
Paber
25,30 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 13450:2007

Raudteeballast
Uusim versioon Kehtiv
Muudatus

EVS-EN 13481-1:2002/A1:2006

Raudteealased rakendused. Rööbastee. Nõuded kinnitussüsteemide tööomadustele. Osa 1: Määratlused.
Kehtetu alates 05.06.2012
Põhitekst

EVS-EN 13674-1:2011

Raudteealased rakendused. Rööbastee. Rööbas. Osa 1: Laiatallalised (Vignole’i) raudteerööpad lineaarmassiga 46 kg/m ja üle selle
Kehtetu alates 02.06.2017
Põhitekst + muudatus

EVS-EN 13674-2:2006+A1:2010

Raudteealased rakendused. Rööbastee. Rööbas. Osa 2: Pöörangute ja ristumiste liikuvad ja ristuvad rööpad ühenduses Vignole`i raudteerööbaste lineaarmassiga 46 kg/m ja üle selle
Kehtetu alates 15.10.2019