Tagasi

EVS-EN 301 489-12 V3.1.1:2019

Elektromagnetilise ühilduvuse ja raadiospektri küsimused (ERM); Raadioseadmete ja teenuste elektromagnetilise ühilduvuse (EMC) standard; Osa 12: Eritingimused väga väikese apertuuriga satelliitantenniga terminalidele, sagedusvahemikus 4 GHz kuni 30 GHz töötavad paikse satelliitside (FSS) interaktiivsed maajaamad; Elektromagnetilise ühilduvuse harmoneeritud standard

Üldinfo
Kehtiv alates 15.08.2019
Alusdokumendid
ETSI EN 301 489-12 V3.1.1
Tegevusala (ICS grupid)
33 SIDETEHNIKA
Direktiivid või määrused
puuduvad
ETSI standardeid meie e-poest osta ei saa. Neid on võimalik tasuta alla laadida siit.

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
15.08.2019
Põhitekst
The present document, together with ETSI EN 301 489-1, covers the assessment of Earth Stations (ES) operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the Earth Stations (ES) are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and the performance criteria for the ESs, and associated ancillary equipment.
Definitions of the type of Earth Stations (ES) operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) covered by the present document are given in annex B.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and ETSI EN 301 489-1, the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1, except for any special conditions included in the present document. The applicable environments referred to in ETSI EN 301 489-1 where equipment covered by the scope of the present document may be used, should be declared by the manufacturer.
NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU is given in annex A.
*
*
*
Standardi monitooring