Tagasi

EVS-EN 301 489-9 V2.1.1:2019

Elektromagnetilise ühilduvuse (EMC) standard raadioseadmetele ja teenustele; Osa 9: Eritingimused raadiomikrofonidele ja sarnase raadiosagedusega (RF) audiolinkidele, juhtmeta audioseadmetele ja kõrvamonitoridele; Harmoneeritud standard direktiivi 2014/53/EL artikli 3.1(b) oluliste nõuete alusel

Üldinfo
Kehtiv alates 15.10.2019
Alusdokumendid
ETSI EN 301 489-9 V2.1.1
Tegevusala (ICS grupid)
33 SIDETEHNIKA
Direktiivid või määrused
puuduvad
ETSI standardeid meie e-poest osta ei saa. Neid on võimalik tasuta alla laadida siit.
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
15.10.2019
Põhitekst
The present document, together with ETSI EN 301 489-1, covers the assessment of wireless microphones, similar RF audio link equipment, cordless audio, including low power Band II transmitters and in-ear monitoring, intended for the transmission of music and speech, and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of wireless microphones, similar RF audio link equipment, cordless audio and in-ear monitoring are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable EMC tests, the test methods, the limits and the performance criteria for wireless microphones, similar RF audio link equipment, cordless audio, in-ear monitoring and associated ancillary equipment. This equipment can use analogue or digital modulation techniques. Examples of equipment types covered by the present document are given in annex C. Other types of transmitters or receivers, which are intended for combined use, with either wireless radio microphones, RF audio link equipment, cordless audio and in-ear monitoring will be tested to their appropriate EMC standard. Low quality speech applications as toy microphones, babyphones etc. operating at frequencies below 50 MHz, occupied bandwidth < 25 kHz and operating according CEPT/ERC/REC 70-03, annex 1 are excluded from the present document and are considered in ETSI EN 301 489-3. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and ETSI EN 301 489-1, the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1, except for any special conditions included in the present document. The present document is aimed to cover requirements to demonstrate an adequate level of electromagnetic compatibility.
*
*
*
Standardi monitooring