Tagasi

Vabandust – see toode pole enam saadaval

EVS-EN ISO 14341:2008

Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification

Üldinfo
Kehtetu alates 03.03.2011
Alusdokumendid
ISO 14341:2002; EN ISO 14341:2008
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.03.2011
Põhitekst
Põhitekst
EVS-EN ISO 14341:2008
Põhitekst
EVS-EN 440:1999
This International Standard specifies requirements for classification of wire electrodes in the as-welded condition and in the post weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 or a minimum tensile strength of up to 570 N/mm2. One wire electrode can be tested and classified with different shielding gases. This document constitutes a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. 1) Paragraphs and tables which carry the suffix letter “A” are applicable only to wire electrodes classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this International Standard. 2) Paragraphs and tables which carry the suffix letter “B” are applicable only to wire electrodes classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with this International Standard. 3) Paragraphs and tables which have neither the suffix letter “A” nor the suffix letter “B” are applicable to all wire electrodes classified in accordance with this International Standard.
*
*
*
PDF
10,64 € koos KM-ga
Paber
10,64 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 15614-1:2004

Metallide keevitusprotseduuride spetsifitseerimine ja atesteerimine. Keevitusprotseduuri katse. Osa 1: Teraste gaas- ja kaarkeevitus ning nikli ja niklisulamite kaarkeevitus (ISO 15614-1:2004)
Kehtetu alates 05.07.2017
Muudatus

EVS-EN ISO 15614-1:2004/A1:2008

Metallide keevitusprotseduuride spetsifitseerimine ja atesteerimine. Keevitusprotseduuri katse. Osa 1: Teraste gaas- ja kaarkeevitus ning nikli ja niklisulamite kaarkeevitus (ISO 15614-1:2004)
Kehtetu alates 05.07.2017
Põhitekst

EVS-EN ISO 17632:2008

Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification
Kehtetu alates 05.01.2016
Põhitekst

EVS-EN ISO 15614-8:2002

Metallide keevitusprotseduuride spetsifitseerimine ja atesteerimine. Keevitusprotseduuri katse. Osa 8: Torude keevitamine torulaudade ühenduste külge
Kehtetu alates 03.05.2016