Tagasi

EVS-EN ISO 17892-12:2018+A1+A2:2022

Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018 + ISO 17892-12:2018/Amd 1:2021 + ISO 17892-12:2018/Amd 2:2022)

Üldinfo
Kehtiv alates 01.04.2022
Alusdokumendid
ISO 17892-12:2018; EN ISO 17892-12:2018; ISO 17892-12:2018/Amd 1:2021; EN ISO 17892-12:2018/A1:2021; ISO 17892-12:2018/Amd 2:2022; EN ISO 17892-12:2018/A2:2022
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.04.2022
Põhitekst + muudatus
01.04.2022
Muudatus
16.09.2021
Muudatus
01.08.2018
Põhitekst
This document specifies methods for the determination of the liquid and plastic limits of a soil. These comprise two of the Atterberg limits for soils.
The liquid limit is the water content at which a soil changes from the liquid to the plastic state.
This document describes the determination of the liquid limit of a specimen of natural soil, or of a specimen of soil from which material larger than about 0,4 mm has been removed. This document describes two methods: the fall cone method and the Casagrande method.
NOTE The fall cone method in this document should not be confused with that of ISO 17892-6.
The plastic limit of a soil is the water content at which a soil ceases to be plastic when dried further.
The determination of the plastic limit is normally made in conjunction with the determination of the liquid limit. It is recognized that the results of the test are subject to the judgement of the operator, and that some variability in results will occur.
*
*
*
PDF
20,74 € koos KM-ga
Paber
20,74 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 17892-4:2016

Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016)
Uusim versioon Kehtiv alates 03.01.2017
Põhitekst

EVS-EN 13253:2016

Geotekstiilid ja analoogse funktsiooniga tooted. Nõutavad omadused kasutamiseks erosiooni tõkestavatel ehitustöödel (kalda- ja nõlvakindlustised)
Uusim versioon Kehtiv alates 01.11.2016
Põhitekst

EVS-EN 933-9:2022

Täitematerjalide geomeetriliste omaduste katsetamine. Osa 9: Peenosiste hindamine. Metüleensinise katse
Uusim versioon Kehtiv alates 15.03.2022
Põhitekst

EVS-EN ISO 10390:2022

Soil, treated biowaste and sludge - Determination of pH (ISO 10390:2021)
Uusim versioon Kehtiv alates 01.04.2022