Tagasi

IEC 61000-4-5:2014+AMD1:2017 CSV

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

Üldinfo
Kehtiv alates 04.08.2017
Tegevusala (ICS grupid)
33.100.20 Immuunsus
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
04.08.2017
Põhitekst
IEC 61000-4-5:2014+A1:2017 relates to the immunity requirements, test methods, and range of recommended test levels for equipment with regard to unidirectional surges caused by over-voltages from switching and lightning transients. Several test levels are defined which relate to different environment and installation conditions. These requirements are developed for and are applicable to electrical and electronic equipment. The object of this standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to surges. The test method documented describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. This standard defines a range of:
- test levels;
- test equipment;
- test setups; and
- test procedures. The task of the described laboratory test is to find the reaction of the equipment under test (EUT) under specified operational conditions to surge voltages caused by switching and lightning effects. It is not intended to test the capability of the EUT's insulation to withstand high-voltage stress. Direct injections of lightning currents, i.e. direct lightning strikes, are not considered in this standard. This third edition cancels and replaces the second edition published in 2005, and constitutes a technical revision which includes the following significant technical changes with respect to the previous edition:
- a new Annex E on mathematical modelling of surge waveforms;
- a new Annex F on measurement uncertainty;
- a new Annex G on method of calibration of impulse measuring systems; and
- a new Annex H on coupling/decoupling surges to lines rated above 200 A. Moreover while surge test for ports connected to outside telecommunication lines was addressed in 6.2 of the second edition (IEC 61000-4-5:2005), in this third edition (IEC 61000-4-5:2014) the normative Annex A is fully dedicated to this topic. In particular it gives the specifications of the 10/700 µs combined wave generator. This consolidated version consists of the third edition (2014) and its amendment 1 (2017). Therefore, no need to order amendment in addition to this publication.

Keywords: electromagnetic compatibility, EMC, TC77, SC77B
*
*
*
PDF
444,44 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

IEC 61000-4-6:2013

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
Uusim versioon Kehtiv alates 23.10.2013
Põhitekst

IEC 61000-4-16:2015

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
Uusim versioon Kehtiv alates 09.12.2015
Põhitekst

CISPR 11:2015+AMD1:2016+AMD2:2019 CSV

Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz
Uusim versioon Kehtiv alates 18.01.2019
Põhitekst

IEC 61000-4-3:2020

Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
Uusim versioon Kehtiv alates 08.09.2020