Tagasi

prEN 301 489-17 V3.2.5

Raadioseadmete ja raadiosideteenistuste elektromagnetilise ühilduvuse (EMC) standard; Osa 17. Eritingimused lairiba andmeedastussüsteemidele; Elektromagnetilise ühilduvuse harmoneeritud standard

Üldinfo
Kavand
Alusdokumendid
Draft ETSI EN 301 489-17 V3.2.5
Tegevusala (ICS grupid)
33 SIDETEHNIKA
Direktiivid või määrused
puuduvad
ETSI standardeid meie e-poest osta ei saa. Neid on võimalik tasuta alla laadida siit.
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
The present document specifies technical characteristics and methods of measurements for broadband and wideband data transmission system equipment including the associated ancillary equipment in respect of electromagnetic compatibility, as detailed in table 1. Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for broadband and wideband data transmission systems as detailed in table 1. NOTE: In the context of the present document, broadband and wideband are interchangeable. Table 1: Radio Technologies in scope of the present document Technology; ETSI Standard Wideband transmission systems/ Data transmission equipment operating in the 2,4 GHz band; ETSI EN 300 328 [i.8] 5 GHz RLAN; ETSI EN 301 893 6 GHz WAS/RLAN; ETSI EN 303 687 Wireless Access Systems (WAS)/5,8 GHz fixed broadband data transmitting systems; ETSI EN 302 502 Multi-Gigabit Wireless Systems (MGWS) in the 60 GHz band; ETSI EN 302 567 Wideband Data Transmission Systems (WDTS) for Fixed Network Radio Equipment operating in the 57 GHz to 71 GHz band; ETSI EN 303 722 Emissions requirements in the present document are specified for frequencies above 9 kHz. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1, except for any special conditions included in the present document. NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU is given in annex A.
*
*
*
Standardi monitooring