Tagasi

prEN 302 065-3-1 V3.1.0

Lähitoimeseadmed (SRD), mis kasutavad ultralairiba (UWB) tehnoloogiat; Raadiospektrile juurdepääsu harmoneeritud standard; Osa 3. Nõuded maantee- ja raudteesõidukite UWB seadmetele Jagu 1. Sõidukite ligipääsusüsteemide UWB seadmete nõuded

Üldinfo
Kavand
Alusdokumendid
Draft ETSI EN 302 065-3-1 V3.1.0
Tegevusala (ICS grupid)
33 SIDETEHNIKA
Direktiivid või määrused
puuduvad
ETSI standardeid meie e-poest osta ei saa. Neid on võimalik tasuta alla laadida siit.
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
The present document specifies technical characteristics and methods of measurements for equipment employing UWB devices for vehicle access systems, which use pulse based, packet oriented UWB signals for data transfer and/or distance bounding and/or localization purpose. EXAMPLE: Radio equipment employing UWB technology for vehicle access systems is equipment intended to be utilized for vehicle access, vehicle immobilization and extended vehicle access control functionalities (like closing windows or remotely starting the car). Following types of equipment are covered by the present document: 1) Equipment Type 1: Vehicle transceivers, which meet the conditions below: a) Vehicle transceivers communicate on a "trigger-before-transmit" basis with: i) vehicle ID devices (equipment type 2); and/or ii) other vehicle transceivers (equipment type 1); and/or iii) other UWB devices (e.g. smartphones). b) Vehicle transceivers are installed in the vehicle. c) Vehicle transceivers are capable of operating in the permitted frequency range as specified in Table 1 with either an integral antenna or a Radio Frequency (RF) output connection and dedicated antenna. 2) Equipment type 2: Vehicle ID devices (e.g. key fobs), which meet the conditions below: a) Vehicle ID devices are handheld devices. b) Vehicle ID devices communicate with vehicle transceivers (equipment type 1). c) Vehicle ID devices are paired with one specific vehicle and are an accessory to this vehicle. d) Vehicle ID devices are capable of operating in the permitted frequency range as specified in Table 1 using an integral antenna. NOTE 1: Other UWB devices - like UWB enabled smartphones - are not covered by the present document. The permitted frequency bands are defined in Table 1. Table 1: Permitted frequency bands for vehicular access systems Frequency Band; Application Transmit and Receive 3,8 GHz to 4,2 GHz; vehicular access Transmit and Receive 6,0 GHz to 8,5 GHz; vehicular access NOTE 2: Permitted frequency bands are based on ECC/DEC/(06)04, Annex 1.2, Table 3. NOTE 3: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU is given in Annex A.
*
*
*
Standardi monitooring