Tagasi

prEN ISO 17664-1

Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices - Part 1: Critical and semi-critical medical devices (ISO/FDIS 17664-1:2020)

Üldinfo
Kavand
Alusdokumendid
ISO/FDIS 17664-1; prEN ISO 17664-1
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
Põhitekst
18.12.2017
Põhitekst
This document specifies requirements for the information to be provided by the medical device manufacturer for the processing of critical or semi-critical medical devices (i.e. a medical device that enters normally sterile parts of the human body or a medical device that comes into contact with mucous membranes or non-intact skin) or medical devices that are intended to be sterilized. This includes information for processing prior to use or reuse of the medical device. Processing instructions are not defined in this document. Rather, this document specifies requirements to assist manufacturers of medical devices in providing detailed processing instructions that consist of the following activities, where applicable: a) initial treatment at the point of use; b) preparation before cleaning; c) cleaning; d) disinfection; e) drying; f) inspection and maintenance; g) packaging; h) sterilization; i) storage; j) transportation. This document excludes processing of the following: — non-critical medical devices unless they are intended to be sterilized; — textile devices used in patient draping systems or surgical clothing; — medical devices specified by the manufacturer for single use only and supplied ready for use. NOTE See ISO 17664-2:—, Annex E, for further guidance on the application of the ISO 17664 series to a medical device.
*
*
*
PDF
7,80 € koos KM-ga
Paber
7,80 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

ISO 17664-2:2021

Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices — Part 2: Non-critical medical devices
Uusim versioon Kehtiv alates 25.02.2021
Põhitekst

EVS-EN ISO 80000-1:2013

Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011)
Uusim versioon Kehtiv alates 06.05.2013
Põhitekst

EVS-EN ISO 80000-4:2019

Quantities and units - Part 4: Mechanics (ISO 80000-4:2019)
Uusim versioon Kehtiv alates 01.11.2019
Põhitekst

EVS-EN ISO 80000-3:2020

Quantities and units - Part 3: Space and time (ISO 80000-3:2019)
Uusim versioon Kehtiv alates 16.11.2020