Skip to main content

Vabandust – see toode pole enam saadaval

prEN ISO 23125-1

Machine tools safety - Turning machines - Part 1: Safety requirements (ISO/DIS 23125-1:2023)


ISO/DIS 23125-1; prEN ISO 23125-1
Tegevusala (ICS grupid)
25.080.01 Tööpingid üldiselt
Direktiivid või määrused

Standardi ajalugu

prEN ISO 23125-1
This International Standard specifies the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of turning machines and turning centres, which are designed primarily to shape metal by cutting.
— Group 1: Manually controlled turning machines without numerical control.
— Group 2: Manually controlled turning machines with limited numerically controlled capability.
— Group 3: Numerically controlled turning machines and turning centres.
— Group 4: Single- or multi-spindle automatic turning machines.
NOTE 1 For detailed information on the machine groups, see the definitions in 3.5, features and limitations in 5.1.1 and mandatory and optional modes of operation in
NOTE 2 Requirements in this International Standard are, in general, applicable to all groups of turning machines. If requirements are applicable to some special group(s) of turning machines only, then the special group(s) of turning machine(s) is/are specified.
NOTE 3 The automatic exchange of clamping devices are excluded from this standard.
This international standard takes account of intended use, including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It specifies access conditions to operators positions and manual load/unload stations. It presumes accessibility to the machine from all directions. It describes means to reduce risks to operators and other exposed persons.
This international standard also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.
This international standard deals with significant hazards relevant to turning machines when they are used as intended and under the conditions foreseen by the manufacturer (see 4). Risk analysis of hazards arising from other metal working processes (e.g. grinding, milling, friction welding, forming, electro discharge, laser processing) are covered by other standards (see Bibliography). However, if additional milling and grinding operations are provided hazard arising from additional clamping condition and ejection of parts shall be considered.
This International Standard also applies to machines which are integrated into an automatic production line or turning cell in as much as the hazards and risks arising are comparable to those of machines working separately.
This International Standard also includes a minimum list of safety-relevant information which the manufacturer has to provide to the user. See also ISO 12100:2010, Figure 2, which illustrates the interaction of manufacturer's and user's responsibility for the operational safety.
The user's responsibility is to identify specific hazards (e.g. fire and explosion) and reduce the associated risks can be critical (e.g. whether the central extraction system is working correctly).
This International Standard applies to machines that are manufactured after the date of issue of this International Standard.

Nõutud väljad on tähistatud *

32,64 € koos KM-ga
32,64 € koos KM-ga
Standardi monitooring