Tagasi

EVS-EN IEC 62040-1:2019+A11:2021

Katkematu toite süsteemid. Osa 1: Ohutusnõuded

Üldinfo
Kehtiv alates 01.03.2021
Alusdokumendid
IEC 62040-1:2017; EN IEC 62040-1:2019; IEC 62040-1:2017/COR1:2019; EN IEC 62040-1:2019/AC:2019-11; EN IEC 62040-1:2019/A11:2021
Direktiivid või määrused
2014/35/EU Madalpinge

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
Muudatus
EN IEC 62040-1:2019/prA2:2022
15.11.2023
Põhitekst + muudatus
01.03.2021
Põhitekst + muudatus
15.02.2021
Muudatus
02.12.2019
Parandus
01.08.2019
Põhitekst
This part of IEC 62040 applies to movable, stationary, fixed or built-in UPS for use in lowvoltage
distribution systems and that are intended to be installed in an area accessible by an
ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC
output voltage with port voltages not exceeding 1 000 V AC or 1 500 V DC and that include an
energy storage device. It applies to pluggable and to permanently connected UPS, whether
consisting of a system of interconnected units or of independent units, subject to installing,
operating and maintaining the UPS in the manner prescribed by the manufacturer.
NOTE 1 Typical UPS configurations, including voltage and/or frequency converters and other topologies, are
described in IEC 62040-3, the test and performance product standard for UPS.
NOTE 2 UPS generally connect to their energy storage device through a DC link. A chemical battery is used
throughout the standard as an example of an energy storage device. Alternative devices exist, and as such, where
"battery" appears in the text of this document, this is to be understood as "energy storage device".
This document specifies requirements to ensure safety for the ordinary person who comes
into contact with the UPS and, where specifically stated, for the skilled person. The objective
is to reduce risks of fire, electric shock, thermal, energy and mechanical hazards during use
and operation and, where specifically stated, during service and maintenance.
This product standard is harmonized with the applicable parts of group safety publication
IEC 62477-1:2012 for power electronic converter systems and contains additional requirements
relevant to UPS.
This document does not cover:
• UPS that have a DC output ;
• systems for operation on moving platforms including, but not limited to, aircrafts, ships and
motor vehicles;
• external AC or DC input and output distribution boards covered by their specific product
standard;
• stand-alone static transfer systems (STS) covered by IEC 62310-1;
• systems wherein the output voltage is directly derived from a rotating machine;
• telecommunications apparatus other than UPS for such apparatus;
• functional safety aspects covered by IEC 61508 (all parts).
NOTE 3 Even if this document does not cover the applications listed above, it is commonly taken as a guide for
such applications.
NOTE 4 Specialized UPS applications are generally governed by additional requirements covered elsewhere, for
example UPS for medical applications.
*
*
*
PDF
28,06 € koos KM-ga
Paber
28,06 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst + muudatus

EVS-EN 62477-1:2012+A11+A1+A12:2021

Jõupooljuht-muundussüsteemide ja -muundusseadmete ohutusnõuded. Osa 1: Üldnõuded
Kehtetu alates 01.11.2023
Põhitekst

EVS-EN IEC 62040-3:2021

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
Uusim versioon Kehtiv alates 15.06.2021
Põhitekst

EVS-EN IEC 62040-2:2018

Katkematu toite süsteemid. Osa 2: Elektromagnetilise ühilduvuse nõuded
Uusim versioon Kehtiv alates 18.09.2018
Põhitekst + muudatus

EVS-EN 62053-22:2003+A1:2017

Elektrimõõteseadmed vahelduvvoolule. Erinõuded. Osa 22: Staatilised aktiivenergia arvestid (klass 0,2 S ja 0,5 S)
Kehtetu alates 03.05.2021