Skip to main content
Tagasi

EVS-EN ISO 13383-1:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012)

Üldinfo

Kehtiv alates 01.06.2016
Alusdokumendid
ISO 13383-1:2012; EN ISO 13383-1:2016
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.06.2016
Põhitekst
04.02.2002
Põhitekst
ISO 13383-1:2012 describes manual methods of making measurements for the determination of grain size of fine ceramics (advanced ceramics, advanced technical ceramics) using photomicrographs of polished and etched test pieces. The methods described in ISO 13383-1:2012 do not yield the true mean grain diameter, but a somewhat smaller parameter depending on the method applied to analyse a two-dimensional section. The relationship to true grain dimensions depends on the grain shape and the degree of microstructural anisotropy. ISO 13383-1:2012 contains two principal methods, A and B.
Method A is the mean linear intercept technique. Method A1 applies to single-phase ceramics, and to ceramics with a principal crystalline phase and a glassy grain-boundary phase of less than about 5 % by volume for which intercept counting suffices. Method A2 applies to ceramics with more than about 5 % by volume of pores or secondary phases, or ceramics with more than one major crystalline phase where individual intercept lengths are measured, which can optionally be used to create a size distribution. This latter method allows the pores or phases to be distinguished and the mean linear intercept size for each to be calculated separately.
Method B is the mean equivalent circle diameter method, which applies to any type of ceramic with or without a secondary phase. This method may also be employed for determining grain aspect ratio and a size distribution.

Nõutud väljad on tähistatud *

*
*
*
PDF
19,52 € koos KM-ga
Paber
19,52 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 197-1:2011

Tsement. Osa 1: Harilike tsementide koostis, spetsifikatsioonid ja vastavuskriteeriumid
Uusim versioon Kehtiv alates 04.10.2011
Põhitekst + muudatus

EVS-EN 12620:2005+A1:2008

Betooni täitematerjalid KONSOLIDEERITUD TEKST
Uusim versioon Kehtiv
Põhitekst

EVS-EN 13043:2004

Asfaltsegude ning teede, lennuväljade ja muude liiklusalade pindamiskihtide täitematerjalid
Uusim versioon Kehtiv
Põhitekst

EVS-EN 459-1:2015

Ehituslubi. Osa 1: Määratlused, spetsifikatsioon ja vastavuskriteeriumid
Uusim versioon Kehtiv alates 08.06.2015