Tagasi

EVS-EN ISO 527-5:2010

Plastid. Tõmbeomaduste määramine. Osa 5: Orienteerimata kiudarmatuuriga plastkomposiitide katsetingimused

Üldinfo
Kehtetu alates 15.12.2021
Alusdokumendid
ISO 527-5:2009; EN ISO 527-5:2009
Tegevusala (ICS grupid)
83.120 Tugevdatud plastid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
15.12.2021
Põhitekst
04.03.2010
Põhitekst
Põhitekst
EVS-EN ISO 527-5:2000
1.1  This part of ISO 527 specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in Part 1. 1.2  See ISO 527-1:1993, Subclause 1.2. 1.3  The test method is suitable for all polymer matrix systems reinforced with unidirectional fibres and which meet the requirements, including failure mode, set out in this part of ISO 527. The method is suitable for composites with either thermoplastic or thermosetting matrices, including preimpregnated materials (prepregs). The reinforcements covered include carbon fibres, glass fibres, aramid fibres and other similar fibres. The reinforcement geometries covered include unidirectional (i.e. completely aligned) fibres and rovings and unidirectional fabrics and tapes. The method is not normally suitable for multidirectional materials composed of several unidirectional layers at different angles (see ISO 527-4). 1.4  The method is performed using one of two different types of test specimen, depending on the direction of the applied stress relative to the fibre direction (see Clause 6). 1.5  See ISO 527-1:1993, Subclause 1.5.
*
*
*
PDF
13,42 € koos KM-ga
Paber
13,42 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 527-1:2012

Plastid. Tõmbeomaduste määramine. Osa 1: Üldpõhimõtted (ISO 527-1:2012)
Kehtetu alates 01.10.2019
Põhitekst

EVS-EN ISO 527-2:2012

Plastid. Tõmbeomaduste määramine. Osa 2: Vormitud ja ekstrusiooni teel saadud plastide teimimise tingimused (ISO 527-2:2012)
Uusim versioon Kehtiv alates 04.04.2012
Põhitekst

EVS-EN ISO 527-3:2000

Plastid. Tõmbeomaduste määramine. Osa 3: Kilede ja lehtmaterjali katsetingimused
Kehtetu alates 03.01.2019
Põhitekst

EVS-EN ISO 14125:2000

Kiudsarrustatud plastkomposiidid. Paindeomaduste määramine
Uusim versioon Kehtiv alates 01.01.2000