Skip to main content
Tagasi

CEN/TR 15225:2005

Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars

Üldinfo

Kehtiv alates 07.09.2005
Alusdokumendid
CEN/TR 15225:2005
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
07.09.2005
Põhitekst
These specifications are for the elaboration of FPC according to the instructions in Table ZA.3 in EN 998-2/ Annex ZA, which refer to Clause 8.3 - Factory Production Control.
Manufacturers having a factory production control system which complies with EN ISO 9001:2000 and
which addresses the requirements of the harmonised standard EN 998-2, are recognised as satisfying the FPC requirements of the Directive.
The manufacturer shall establish, document and maintain a factory production control system to enable continuing conformity with the standard and the declared values of the products placed on the market.
The responsibility, authority and interrelation of all personnel who manage, perform and verify work
affecting the quality of designed masonry mortar products shall be defined in the documentation of the factory production control system and keep effective.
The factory production control system shall describe the procedure of production, the regular inspections by the manufacturer and the testing. Controls and tests should address the characteristics of raw materials and finished products, as well as the production procedures, the production
equipment or machines, the test equipment and the marking of the product.
All the test results shall be recorded.
Actions to be taken when the control test values or criteria do not meet those specified shall be documented by the manufacturer.
The conformity of the product shall be determined by testing according to the requirements of the harmonized standard EN 998-2 and correlated to the values and parameters stated in the factory
production control manual.

Nõutud väljad on tähistatud *

*
*
*
PDF
12,20 € koos KM-ga
Paber
12,20 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 912:2003

Timber fasteners - Specifications for connectors for timber
Kehtetu alates 03.08.2011
Põhitekst + muudatus

EVS-EN 1015-1:2004+A1:2007

Müürimörtide katsemeetodid. Osa 1: Terastikulise koostise määramine (sõelanalüüs) KONSOLIDEERITUD TEKST
Uusim versioon Kehtiv alates 04.06.2009
Põhitekst + muudatus

EVS-EN 1015-10:2005+A1:2007

Müürimörtide katsemeetodid. Osa 10: Kivistunud mördi kuiva näivtiheduse määramine KONSOLIDEERITUD TEKST
Uusim versioon Kehtiv alates 04.06.2009
Põhitekst + muudatus

EVS-EN 1015-11:2004+A1:2007

Müürimörtide katsemeetodid. Osa 11: Kivistunud mördi painde- ja survetugevuse määramine KONSOLIDEERITUD TEKST
Kehtetu alates 15.06.2020