Tagasi

EVS-EN ISO 16120-1:2017

Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017)

Üldinfo
Kehtiv alates 16.06.2017
Alusdokumendid
ISO 16120-1:2017; EN ISO 16120-1:2017
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
16.06.2017
Põhitekst
03.08.2011
Põhitekst
ISO 16120-1:2017 series is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface.
ISO 16120-1:2017 specifies general requirements for non-alloy steel wire rod for conversion to wire. It is not applicable to products for which standards exist or are in development, for example:
- steel wire rod intended for heat treatment;
- free-cutting steel wire rod;
- steel wire rod for cold heading and cold extrusion;
- steel wire rod intended for the production of electrodes and products for welding;
- steel wire rod for welded fabric for reinforcement for concrete;
- steel wire rod for ball and roller bearings (see ISO 683‑17);
- steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs.
In addition to the requirements of this document, the general technical delivery requirements specified in ISO 404 apply.
*
*
*
PDF
20,74 € koos KM-ga
Paber
20,74 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 16120-4:2017

Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2017)
Uusim versioon Kehtiv alates 16.06.2017
Põhitekst

EVS-EN ISO 16120-2:2017

Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod (ISO 16120-2:2017)
Uusim versioon Kehtiv alates 02.03.2017
Põhitekst

EVS-EN ISO 16120-3:2011

Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011)
Uusim versioon Kehtiv alates 03.08.2011
Põhitekst

EVS-EN 10303:2015

Thin magnetic steel strip and sheet for use at medium frequencies
Uusim versioon Kehtiv alates 03.12.2015