Tagasi

EVS-EN ISO 18563-2:2017

Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017)

Üldinfo
Kehtiv alates 18.09.2017
Alusdokumendid
ISO 18563-2:2017; EN ISO 18563-2:2017
Tegevusala (ICS grupid)
19.100 Mittepurustav katsetamine
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
Põhitekst
prEN ISO 18563-2
18.09.2017
Põhitekst
06.05.2014
Põhitekst
ISO 18563-2:2017 specifies the characterization tests performed at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria.
ISO 18563-2:2017 is applicable to the following phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz to 10 MHz:
a) non-matrix array probes:
- linear;
- encircling;
- partial annular sectorial (type "daisy");
b) 2D-matrix array probes.
ISO 18563-2:2017 does not give methods and acceptance criteria to characterize the performance of an ultrasonic phased array instrument or the performance of a combined system. These are given in ISO 18563?1 and in ISO 18563?3.
*
*
*
PDF
13,42 € koos KM-ga
Paber
13,42 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 18563-3:2015

Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015)
Uusim versioon Kehtiv alates 05.01.2016
Põhitekst

EVS-EN ISO 18563-1:2015

Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2015)
Kehtetu alates 17.10.2022
Põhitekst

EVS-EN ISO 13588:2019

Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
Uusim versioon Kehtiv alates 15.03.2019
Põhitekst

EVS-EN ISO 17640:2018

Keevisõmbluste mittepurustav katsetamine. Ultraheliga katsetamine. Meetodid, katsetasemed ja hindamine
Uusim versioon Kehtiv alates 19.12.2018