Tagasi

EVS-EN ISO 21013-3:2016

Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016)

Üldinfo
Kehtiv alates 05.07.2016
Alusdokumendid
ISO 21013-3:2016; EN ISO 21013-3:2016
Tegevusala (ICS grupid)
23.020.40 Krüogeenanumad
Direktiivid või määrused
2014/68/EU Surveseadmed

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
05.07.2016
Põhitekst
01.03.2003
Põhitekst
ISO 21013-3:2016 provides separate calculation methods for determining the required mass flow to be relieved for each of the following specified conditions:
- vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum, outer jacket at ambient temperature, inner vessel at temperature of the contents at the specified relieving pressure;
- vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum, outer jacket at ambient temperature, inner vessel at temperature of the contents at the specified relieving pressure, pressure regulator of the pressure build-up system functioning at full potential;
- vacuum or non-vacuum-insulated vessels with insulation system remaining in place, but with loss of vacuum in the case of vacuum-insulated vessels, outer jacket at ambient temperature, inner vessel at temperature of the contents at the specified relieving pressure or vacuum or non-vacuum-insulated vessels with insulation system remaining fully or partially in place, but with loss of vacuum in the case of vacuum-insulated vessels, fire engulfment, inner vessel at temperature of the contents at the specified relieving pressure;
- vacuum-insulated vessels containing fluids with saturation temperature below 75 K at 1 bar with insulation system remaining in place, but with loss of vacuum with air or nitrogen in the vacuum space;
- vacuum insulated vessels containing fluids with saturation temperature below 75 K at 1 bar with insulation system remaining in place, but with loss of vacuum with air or nitrogen in the vacuum space with fire engulfment;
- vessels with insulation system totally lost and fire engulfment.
Good engineering practice based on well-established theoretical physical science needs to be adopted to determine the required mass flow where an appropriate calculation method is not provided for an applicable condition.
Recommendations for pressure relief devices for cryostats are given in Annex A.
*
*
*
PDF
23,18 € koos KM-ga
Paber
23,18 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 21012:2018

Krüogeenanumad. Voolikud
Uusim versioon Kehtiv alates 03.01.2019
Põhitekst

EVS-EN ISO 17268:2020

Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2020)
Uusim versioon Kehtiv alates 19.03.2020
Põhitekst

EVS-EN IEC 62282-3-100:2020

Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
Uusim versioon Kehtiv alates 15.04.2020
Põhitekst

EVS-EN 13445-5:2021

Leekkuumutuseta surveanumad. Osa 5: Kontroll ja katsetamine
Uusim versioon Kehtiv alates 01.07.2021