Tagasi

IEC 60287-3-1:2017

Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions

Üldinfo
Kehtiv alates 08.06.2017
Tegevusala (ICS grupid)
29.060.20 Kaablid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
08.06.2017
Põhitekst
Põhitekst
IEC 60287-3-1:2017 is applicable to the conditions of steady-state operation of cables at all voltages, buried directly in the ground, in ducts, troughs or in steel pipes, both with and without partial drying-out of the soil, as well as cables in air. The term "steady state" is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature, the surrounding ambient conditions being assumed constant. This document defines site reference conditions, however the general values are superseded by specific national requirements. This edition includes the following significant technical changes with respect to the previous edition:
- the updated list of national laying conditions is now covered in Annex A;
- Clause 5 about the information required from the purchaser for the selection of the appropriate type of cable has been removed.
*
*
*
PDF
196,66 € koos KM-ga
PDF redline
275,33 € koos KM-ga
Paber
196,66 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 15459-1:2017

Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14
Uusim versioon Kehtiv alates 16.06.2017
Põhitekst

EVS-EN 16798-17:2017

Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
Uusim versioon Kehtiv alates 16.06.2017
Põhitekst

EVS-EN 16798-5-1:2017

Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation
Uusim versioon Kehtiv alates 16.06.2017