Tagasi

IEC 63044-5-3:2017

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments

Üldinfo
Kehtiv alates 27.01.2017
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
16.06.2022
Muudatus
27.01.2017
Põhitekst
IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.
This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2.
NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to
- operator stations and other human/system interface devices
- devices for management functions,
- control devices, automation stations and application-specific controllers
- field devices and their interfaces,
- cabling and interconnection of devices.
used within a dedicated HBES/BACS network.
This publication is to be read in conjunction with IEC 63044-5-1:2017.
*
*
*
PDF
26,22 € koos KM-ga
Paber
26,22 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 63044-1:2017

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements
Kehtiv alates 16.05.2017
Põhitekst

IEC 63044-5-2:2017

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments
Uusim versioon Kehtiv alates 27.01.2017
Põhitekst

IEC 63044-5-1:2017

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up
Uusim versioon Kehtiv alates 27.01.2017