Skip to main content
Back

EVS-EN 62232:2017

Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure

General information

Withdrawn from 01.12.2022
Base Documents
IEC 62232:2017; EN 62232:2017
Directives or regulations
None

Standard history

Status
Date
Type
Name
01.12.2022
Main
18.12.2017
Main
06.05.2014
Amendment
EVS-EN 50492:2008/A1:2014
05.08.2013
Corrigendum
EVS-EN 50383:2010/AC:2013
05.12.2012
Amendment
EVS-EN 50400:2006/A1:2012
02.11.2011
Corrigendum
EVS-EN 50400:2006/AC:2011
06.12.2010
Main
EVS-EN 50383:2010
09.01.2009
Main
EVS-EN 50492:2008
06.10.2006
Main
EVS-EN 50400:2006
IEC 62232:2017(E) provides methods for the determination of radio-frequency (RF) field strength and specific absorption rate (SAR) in the vicinity of radiocommunication base stations (RBS) for the purpose of evaluating human exposure. This document:
- considers intentionally radiating RBS which transmit on one or more antennas using one or more frequencies in the range 110 MHz to 100 GHz;
- considers the impact of ambient sources on RF exposure at least in the 100 kHz to 300 GHz frequency range;
- specifies the methods to be used for RF exposure evaluation for compliance assessment applications, namely:
- product compliance - determination of compliance boundary information for an RBS product before it is placed on the market;
- product installation compliance - determination of the total RF exposure levels in accessible areas from an RBS product and other relevant sources before the product is put into service;
- in-situ RF exposure assessment – measurement of in-situ RF exposure levels in the vicinity of an RBS installation after the product has been taken into operation;
- describes several RF field strength and SAR measurement and computation methodologies with guidance on their applicability to address both the in-situ evaluation of installed RBS and laboratory-based evaluations;
- describes how surveyors, with a sufficient level of expertise, establish their specific evaluation procedures appropriate for their evaluation purpose;
- provides guidance on how to report, interpret and compare results from different evaluation methodologies and, where the evaluation purpose requires it, determine a justified decision against a limit value and
- provides short descriptions of the informative example case studies given in the companion Technical Report IEC TR 62669 [1]
This second edition cancels and replaces the first edition published in 2011 and constitutes a technical revision.

Required fields are indicated with *

*
*
*
PDF
46.36 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 62110:2010

Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public exposure
Newest version Valid from 04.03.2010
Main

ISO 11452-4:2020

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Harness excitation methods
Newest version Valid from 24.04.2020
Main

EVS-EN 62369-1:2009

Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
Newest version Valid from 07.05.2009
Main

ISO 11452-2:2019

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
Newest version Valid from 10.01.2019