Skip to main content
Tagasi

EVS-EN 12285-3:2019

Töökojas valmistatud terasest mahutid. Osa 3: Hoonete kütmiseks ja jahutamiseks mõeldud horisontaalsed silindrilised ühekordsete ja kahekordsete seintega mahutid põlevate ja mittepõlevate vett saastavate vedelike maa-aluseks ladustamiseks

Üldinfo

Kehtiv alates 15.04.2019
Alusdokumendid
EN 12285-3:2019
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
15.04.2019
Põhitekst
01.05.2003
Põhitekst
This document specifies the product characteristics and test/assessment methods for workshop fabricated cylindrical, horizontal steel tanks, single (type S) and double skin (type D) intended to be used for the underground storage of water polluting liquids (both flammable and non-flammable), specifically used for storage and/or supply of fuel for building heating/cooling systems, and of hot or cold water not intended for human consumption at normal ambient temperature conditions (−20 °C to +50 °C) within the following limits:
-  from 800 mm up to 3000 mm nominal diameter and;
-  up to a maximum overall length of 6 times the nominal diameter;
-  for liquids with a maximum density of up to 1,1 kg/l and;
-  with an operating pressure (Po) of maximum 50 kPa (0,5 bar(g)) and minimum – 5 kPa (–50 mbar(g)) and;
-  for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not exceed 5 × 10−3 m2/s.
Two tank types are distinguished:
-  Type S: Single skin;
-  Type D: Double skin.
Tanks designed to this document allow for an earth cover of up to 1,5 m. If there are imposed traffic loads or a greater earth cover, calculation is required.
This document is not applicable to tanks installed in industrial processes or in petrol stations, nor to loads and special measures necessary in areas subject to risk of earthquakes and/or to flooding.

Nõutud väljad on tähistatud *

*
*
*
PDF
24,40 € koos KM-ga
Paber
24,40 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 12285-1:2018

Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings
Uusim versioon Kehtiv alates 16.07.2018
Muudatus

EVS-EN 13480-2:2017/A1:2018

Metallist tööstustorustik. Osa 2: Materjalid
Kehtiv alates 02.11.2018
Muudatus

EVS-EN 13480-2:2017/A2:2018

Metallist tööstustorustik. Osa 2: Materjalid
Kehtiv alates 02.11.2018
Muudatus

EVS-EN 13445-3:2014/A7:2019

Leekkuumutuseta surveanumad. Osa 3: Kavandamine
Kehtetu alates 01.06.2021