Skip to main content
Tagasi

EVS-EN ISO 11202:2010

Akustika. Masinate ja seadmete müra. Töökoha ja muude määratud asukohtade helirõhutaseme määramine koos keskkonnaoludest tulenevate ligikaudsete korrektsioonide kohaldamisega

Üldinfo

Kehtiv alates 06.09.2010
Alusdokumendid
ISO 11202:2010; EN ISO 11202:2010
Direktiivid või määrused
2006/42/EC Masinad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.06.2021
Muudatus
01.06.2021
Põhitekst + muudatus
06.09.2010
Põhitekst
This International Standard specifies a method for determining the emission sound pressure levels of machinery or equipment, at a work station and at other specified positions nearby,  in situ. A work station is occupied by an operator and may be located in open space, in the room where the source under test operates, in a cab fixed to the source under test, or in an enclosure remote from the source under test. One or more specified positions may be located in the vicinity of a work station, or in the vicinity of an attended or unattended machine. Such positions are sometimes referred to as bystander positions. Emission sound pressure levels are determined as A-weighted levels. Additionally, levels in frequency bands and C-weighted peak emission sound pressure levels can be determined in accordance with this International Standard, if required.Methods are given for determining a local environmental correction (subject to a specified limiting maximum value) to be applied to the measured sound pressure levels in order to eliminate the influence of reflecting surfaces other than the plane on which the source under test is placed. This correction is based on the equivalent sound absorption area of the test room and on radiation characteristics (source location or directivity at the work station). With the method specified in this International Standard, results of accuracy grade 2 (engineering grade) or accuracy grade 3 (survey grade) are obtained. Corrections are applied for background noise and, as described above, for the acoustic environment. Instructions are given for the mounting and operation of the source under test and for the choice of microphone positions for the work station and for other specified positions. One purpose of the measurements is to permit comparison of the performance of different units of a given family of machines, under defined environmental conditions and standardized mounting and operating conditions.

Nõutud väljad on tähistatud *

*
*
*
PDF
26,84 € koos KM-ga
Paber
26,84 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 11201:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
Uusim versioon Kehtiv alates 06.09.2010
Põhitekst

EVS-EN ISO 11204:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
Uusim versioon Kehtiv alates 06.09.2010
Põhitekst

EVS-EN ISO 11200:2014

Akustika. Mehhanismide ja seadmete müra. Juhised üldstandardite kasutamiseks helirõhutaseme määramisel töö- ja muudes piiritletud kohtades
Uusim versioon Kehtiv alates 05.06.2014
Põhitekst

EVS-EN ISO 11203:2009

Akustika. Mehhanismide ja seadmete müra. Helirõhutaseme määramine töö- ja muudes piiritletud kohtades helivõimsustaseme alusel
Uusim versioon Kehtiv alates 06.11.2009