Skip to main content
Tagasi

EVS-EN ISO 6272-1:2011

Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272- 1:2011)

Üldinfo

Kehtiv alates 06.09.2011
Alusdokumendid
ISO 6272-1:2011; EN ISO 6272-1:2011
Tegevusala (ICS grupid)
87.040 Värvid ja lakid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
06.09.2011
Põhitekst
This part of ISO 6272 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions. NOTE The terms “impact” and “impact resistance” are used in the title and text of this part of ISO 6272, but an important characteristic of the apparatus used is that it should produce rapid deformation rather than a true impact. The method described can be applied - either as a pass/fail test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification; - or as a classification test, to determine, by gradually increasing the drop height and/or the mass, the minimum mass and/or drop height for which the coating cracks or peels from its substrate.

Nõutud väljad on tähistatud *

*
*
*
PDF
12,20 € koos KM-ga
Paber
12,20 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 6272-2:2011

Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
Uusim versioon Kehtiv alates 06.09.2011
Põhitekst

EVS-EN ISO 1519:2011

Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
Uusim versioon Kehtiv alates 03.02.2011
Põhitekst

EVS-EN ISO 2409:2013

Paints and varnishes - Cross-cut test (ISO 2409:2013)
Kehtetu alates 02.10.2020
Põhitekst

EVS-EN 1542:2001

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
Uusim versioon Kehtiv alates 01.07.2001