Skip to main content
Tagasi

EVS-EN ISO 898-3:2018

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)

Üldinfo

Kehtiv alates 04.07.2018
Alusdokumendid
ISO 898-3:2018; EN ISO 898-3:2018
Tegevusala (ICS grupid)
21.060.20 Mutrid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
16.09.2021
Põhitekst + muudatus
01.06.2021
Muudatus
04.07.2018
Põhitekst
This document specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898-1 and ISO 898-2.
NOTE 1 These types of washers can also be used with other fasteners such as screws forming their own mating thread.
Washers that conform to the requirements of this document are evaluated at an ambient temperature range of 10 °C to 35 °C. They might not retain the specified mechanical and physical properties at elevated temperatures and/or lower temperatures.
NOTE 2 Washers conforming to the requirements of this document are used in applications ranging from −50 °C to +150 °C. Users are advised to consult an experienced fastener expert for temperatures outside this range and up to a maximum temperature of +300 °C when determining appropriate choices, or for critical applications.
This document is applicable to the following flat captive and non-captive washers made of carbon steel or alloy steel, with thickness from 0,2 mm to 12 mm:
-plain washers (with or without knurls, ribs or chamfers);
-square washers;
-square hole washers;
-shaped plates.
It does not specify requirements for the following properties:
-corrosion resistance;
-weldability.

Nõutud väljad on tähistatud *

*
*
*
PDF
19,52 € koos KM-ga
Paber
19,52 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 898-1:2013

Süsinikterasest ja legeeritud terasest kinnitite mehaanilised omadused. Osa 1: Spetsifitseeritud omadusklassidega poldid, kruvid ja tikkpoldid. Jämekeere ja peenkeere
Uusim versioon Kehtiv alates 05.02.2013
Põhitekst

EVS-EN ISO 898-2:2023

Kinnitid. Süsinikterasest ja legeeritud terasest kinnitite mehaanilised omadused. Osa 2: Spetsifitseeritud omadusklassidega mutrid
Uusim versioon Kehtiv alates 15.02.2023
Põhitekst

EVS-EN ISO 898-2:2012

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
Kehtetu alates 15.02.2023
Põhitekst

EVS-EN 1090-2:2018

Teras- ja alumiiniumkonstruktsioonide valmistamine. Osa 2: Tehnilised nõuded teraskonstruktsioonidele
Kehtetu alates 15.05.2024