Skip to main content
Tagasi

ISO 4126-9:2008

Safety devices for protection against excessive pressure -- Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices

Üldinfo

Kehtiv alates 31.03.2008
Tegevusala (ICS grupid)
13.240 Ülerõhukaitse
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
31.03.2008
Põhitekst
ISO 4126-9:2008 covers the application and installations of safety devices such as safety valves, safety valves and bursting disc safety devices in combination, pilot-operated safety valves and controlled safety pressure-relief systems for the protection of pressure equipment. ISO 4126-6 covers the selection, application and installation of bursting disc safety devices.
ISO 4126-9:2008 describes the normative requirements for applications and installations of safety devices to protect static pressure equipment. The information contained in ISO 4126-9:2008 assumes single-phase flow of the fluid discharged from the safety device. ISO 4126-10 provides guidance specific to two-phase flow conditions.
Equipment connected together in a system by piping of adequate capacity, which is free from potential blockages and does not contain any valve that can isolate any part, can be considered to be a safety system for the application of pressure relief.
ISO 4126-9:2008 does not deal with other safety devices, such as safety related monitoring, control and regulation devices and other limiting devices allowed by some national regulations.

Nõutud väljad on tähistatud *

*
*
*
PDF
197,98 € koos KM-ga
Paber
197,98 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

ISO 4126-10:2010

Safety devices for protection against excessive pressure -- Part 10: Sizing of safety valves for gas/liquid two-phase flow
Kehtetu alates 07.03.2024
Põhitekst

EVS-EN 60534-2-1:2011

Tööstusprotsesside juhtimisventiilid. Osa 2-1: Vooluhulk. Mõõtmete valiku võrrandid vedelikuvoolu järgi paigaldusoludes
Uusim versioon Kehtiv alates 05.07.2011
Põhitekst

EVS-EN ISO 13849-1:2015

Masinate ohutus. Juhtimissüsteemide ohutusega seotud osad. Osa 1: Kavandamise põhimõtted
Kehtetu alates 01.06.2023
Põhitekst

EVS-EN ISO 4126-6:2014

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014)
Uusim versioon Kehtiv alates 04.08.2014