Back

prEN 301 489-17 V3.2.5

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility

General information
Draft
Base Documents
Draft ETSI EN 301 489-17 V3.2.5
Directives or regulations
None
We do not sell ETSI standards on our website. You can download them for no extra charge from here.
Standard history
Status
Date
Type
Name
The present document specifies technical characteristics and methods of measurements for broadband and wideband data transmission system equipment including the associated ancillary equipment in respect of electromagnetic compatibility, as detailed in table 1. Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for broadband and wideband data transmission systems as detailed in table 1. NOTE: In the context of the present document, broadband and wideband are interchangeable. Table 1: Radio Technologies in scope of the present document Technology; ETSI Standard Wideband transmission systems/ Data transmission equipment operating in the 2,4 GHz band; ETSI EN 300 328 [i.8] 5 GHz RLAN; ETSI EN 301 893 6 GHz WAS/RLAN; ETSI EN 303 687 Wireless Access Systems (WAS)/5,8 GHz fixed broadband data transmitting systems; ETSI EN 302 502 Multi-Gigabit Wireless Systems (MGWS) in the 60 GHz band; ETSI EN 302 567 Wideband Data Transmission Systems (WDTS) for Fixed Network Radio Equipment operating in the 57 GHz to 71 GHz band; ETSI EN 303 722 Emissions requirements in the present document are specified for frequencies above 9 kHz. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1, except for any special conditions included in the present document. NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU is given in annex A.
*
*
*
Standard monitoring