Skip to main content
Back
NEW

prEN 301 428 V2.1.3

Satellite Earth Stations and Systems (SES); Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands; Harmonised Standard for access to radio spectrum

General information

Draft
Base Documents
Draft ETSI EN 301 428 V2.1.3
Directives or regulations
None
You can view draft standards in the Commenting portal🡭.

Standard history

Status
Date
Type
Name
The present document specifies technical characteristics and methods of measurements for Very Small Aperture Terminals (VSATs) intended to operate through a geostationary satellite at least 3° away from any other geostationary satellite operating in the same frequency band and covering the same area and which have the following characteristics:
• The VSAT operates in the following bands, or parts thereof, allocated to the Fixed Satellite Service (FSS):
- 10,70 GHz to 11,70 GHz (space-to-Earth);
- 12,50 GHz to 12,75 GHz (space-to-Earth);
- 14,00 GHz to 14,25 GHz (Earth-to-space);
- 14,25 GHz to 14,50 GHz (Earth-to-space);
• The VSAT uses linear polarization.
• The VSAT antenna diameter does not exceed 3,8 m, or equivalent effective area.
• The VSAT is either:
- a transmit only VSAT: designed for transmission only of radio-communications signals in any of the frequency bands (earth-to-space) specified above; or
- a transmit and receive VSAT: designed for transmission and reception of radio-communications signals in any of the frequency bands specified above; or
- a receive only VSAT: designed for reception only of radio-communications signals in any of the frequency bands (space-earth) specified above.
The present document applies to the VSAT with its ancillary equipment and its various terrestrial ports, and when operated within the boundary limits of the operational environmental profile defined for the intended use of the VSAT of the MES.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU is given in Annex A.

Required fields are indicated with *

*
*
*
*
Standard monitoring