Infoteenus
65 PÕLLUMAJANDUS
Uued standardid
Asendatud standardid
IEC 60335-2-92:2002/COR1:2003
Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
Käsitlusala:
Alusdokumendid:
IEC 60335-2-77:2002
Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers
Käsitlusala: Deals with the safety of pedestrian controlled mains-operated
electrical cylinder or rotary lawnmowers designed primarily for use
around the home or for similar purposes, their rated voltage being
not more than 250 V single phase. It does not apply to lawn
trimmers, lawn edge trimmers, lawn edgers, flail mowers, sickle-bar
mowers, or agricultural mowers.
electrical cylinder or rotary lawnmowers designed primarily for use
around the home or for similar purposes, their rated voltage being
not more than 250 V single phase. It does not apply to lawn
trimmers, lawn edge trimmers, lawn edgers, flail mowers, sickle-bar
mowers, or agricultural mowers.
Alusdokumendid:
IEC 60335-2-92:2002
Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
Käsitlusala: Deals with the safety of pedestrian-controlled mains-operated electric lawn scarifiers and aerators. These scarifiers have rotating cutters for regenerating lawns by, for instance, combing out grass thatch and moss, or by cutting vertically into the lawn face. These scarifiers are designed primarily for home use, with a rated voltage not more than 250 V single phase. For lawnmowers, see IEC 60335-2-77; for lawn trimmers, see IEC 60335-2-91.
The contents of the corrigendum of May 2003 have been included in this copy.
The contents of the corrigendum of May 2003 have been included in this copy.
Alusdokumendid:
IEC 60335-2-100:2002
Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
Käsitlusala: Deals with the safety of hand held mains operated electrical garden vacuums, blower/vacuums (with or without shredding means) and garden blowers, with a rated voltage of not more than 250 V single phase.
Alusdokumendid:
IEC 60745-2-15:2006
Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
Käsitlusala: Applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades.
This standard is not applicable to hedge trimmers with a rotating blade.
This standard is not applicable to hedge trimmers with a rotating blade.
Alusdokumendid:
IEC 60745-2-13:2006
Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
Käsitlusala: Applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. Does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners.
Alusdokumendid:
IEC 60335-2-91:2008
Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
Käsitlusala: IEC 60335-2-91:2008 deals with the safety of electric powered walk-behind and hand-held lawn trimmers and lawn edge trimmers, with cutting element(s) of non metallic filament line or freely pivoting non metallic cutter(s), with a kinetic energy of not more than 10 J each, used by a standing operator for cutting grass, their rated voltage being not more than 250 V for a.c. or 50 V d.c.. Main changes in this edition include the revised endurance test in Clause 18; Annex B, which allows for battery-powered trimmers; and addition of informative Annexes BB, CC and EE on vibration, noise and safety instructions.
Alusdokumendid:
IEC 60335-2-94:2008
Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears
Käsitlusala: Deals with the safety of electric powered hand-held scissors type grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass, their rated voltage being not more than 250 V for a.c. or 50 V d.c.
Alusdokumendid:
IEC 60745-2-13:2006+AMD1:2009 CSV
Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
Käsitlusala: IEC 60745-2-13:2006+A1:2009 Applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. Does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners.
This publication is to be read in conjunction with IEC 60745-1:2006.
This consolidated version consists of the second edition (2006) and its amendment 1 (2009). Therefore, no need to order amendment in addition to this publication.
This publication is to be read in conjunction with IEC 60745-1:2006.
This consolidated version consists of the second edition (2006) and its amendment 1 (2009). Therefore, no need to order amendment in addition to this publication.
Alusdokumendid:
IEC 60745-2-15:2006/AMD1:2009
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
Käsitlusala:
Alusdokumendid:
IEC 60745-2-15:2006+AMD1:2009 CSV
Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers
Käsitlusala: IEC 60745-2-15:2006+A1:2009 applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades. This standard is not applicable to hedge trimmers with a rotating blade.
This consolidated version consists of the second edition (2006)
and its amendment 1 (2009). Therefore, no need to order amendment in
addition to this publication.
This consolidated version consists of the second edition (2006)
and its amendment 1 (2009). Therefore, no need to order amendment in
addition to this publication.
Alusdokumendid:
IEC 60745-2-13:2006/AMD1:2009
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws
Käsitlusala:
Alusdokumendid:
Kavandid
prEN ISO 8224-1
Traveller irrigation machines - Part 1: Operational characteristics and laboratory and field test methods (ISO/DIS 8224‑1:2026)
Käsitlusala: This part of ISO 8224 specifies the operational characteristics of, and laboratory and field test methods for, traveller irrigation machines. It includes
— user-oriented technical information for inclusion in the manufacturer's accompanying product literature,
— laboratory test procedures for evaluating the uniformity of water application on an irrigated strip by a machine operating within a specified range of conditions and for determining the maximum travelling rates the drive mechanism is able to achieve in response to specified operating conditions, and
— field test procedures for determining the uniformity of water application on a given irrigated strip under local conditions prevailing in the field at time of testing.
It is applicable only to traveller irrigation machines and not to other types of irrigation machine such as centre-pivot and moving lateral irrigation machines.
— user-oriented technical information for inclusion in the manufacturer's accompanying product literature,
— laboratory test procedures for evaluating the uniformity of water application on an irrigated strip by a machine operating within a specified range of conditions and for determining the maximum travelling rates the drive mechanism is able to achieve in response to specified operating conditions, and
— field test procedures for determining the uniformity of water application on a given irrigated strip under local conditions prevailing in the field at time of testing.
It is applicable only to traveller irrigation machines and not to other types of irrigation machine such as centre-pivot and moving lateral irrigation machines.
Alusdokumendid: ISO/DIS 8224-1; prEN ISO 8224-1