Infoteenus
91.140 Hoonete tehnoseadmed
Uued standardid
EVS-EN 17192:2026
Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods
Käsitlusala: This document specifies the requirements and test methods for rigid or semi-rigid non-metallic ductwork which are used for ventilation and air conditioning in buildings and excludes flexible ducts and ductwork made from insulation duct board.
The specified test methods are under laboratory conditions and exclude on-site tests.
The specified test methods are under laboratory conditions and exclude on-site tests.
Alusdokumendid: EN 17192:2026
Asendab: EVS-EN 17192:2018
EVS-EN ISO 15957:2026
Test dusts for evaluating air cleaning equipment (ISO 15957:2026)
Käsitlusala: This document defines the properties of load test dusts used for heating, ventilation and air conditioning (HVAC) air filters as well as air cleaning equipment in laboratories. Test dusts used for evaluation of efficiency performance are not included.
Alusdokumendid: ISO 15957:2026; EN ISO 15957:2026
Asendab: EVS-EN ISO 15957:2015
Asendatud standardid
EVS-EN ISO 15957:2015
Loading dusts for testing air cleaning equipment (ISO 15957:2015)
Käsitlusala: This standard defines the properties of load test dusts which are used to test air cleaning equipment but not only for HVAC air filters in laboratories and the requirements for load test dust distribution. Efficiency test aerosols are excepted.
Alusdokumendid: EN ISO 15957:2015; ISO 15957:2015
Asendatud: EVS-EN ISO 15957:2026
EVS-EN 17192:2018
Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods
Käsitlusala: This document defines the test methods and performance characteristics for rigid or semi-rigid non-metallic ductwork which are used for ventilation and air conditioning of buildings.
This document does not include flexible ducts such as those made of textiles, non-metallic spiral ductwork or others, which are handled in EN 13180 or ductwork made from insulation duct board, which is handled in EN 13403. Requirements for the air tightness of the ventilation system for non-residential buildings are given in EN 16798-3. For residential buildings, it is essential to apply national rules.
This document specifies methods to test rigid or semi-rigid non-metallic ductwork under laboratory conditions. On-site tests are excluded. The test methods and performance characteristics are valid for ventilation ducts with circular, rectangular or other cross sections-
This document does not include flexible ducts such as those made of textiles, non-metallic spiral ductwork or others, which are handled in EN 13180 or ductwork made from insulation duct board, which is handled in EN 13403. Requirements for the air tightness of the ventilation system for non-residential buildings are given in EN 16798-3. For residential buildings, it is essential to apply national rules.
This document specifies methods to test rigid or semi-rigid non-metallic ductwork under laboratory conditions. On-site tests are excluded. The test methods and performance characteristics are valid for ventilation ducts with circular, rectangular or other cross sections-
Alusdokumendid: EN 17192:2018
Asendatud: EVS-EN 17192:2026
Kavandid
prEVS 919
Suitsutõrje. Projekteerimine, seadmete paigaldus ja korrashoid
Käsitlusala: See standard käsitleb nõudeid hoonete suitsutõrjesüsteemide projekteerimisele, ehitamisele ja hooldamisele. Enne standardi kasutusele võtmist ehitatud suitsutõrjesüsteemidele rakendatakse vaid selle standardi hoolduse ja kontrolli nõudeid. Standard ei käsitle tunnelite suitsutõrjesüsteemide projekteerimist.
Alusdokumendid:
prEN 12405-2
Gas meters - Conversion devices - Part 2: Energy conversion
Käsitlusala: This European Standard specifies the requirements and tests for the construction, performance, safety and conformity of conversion devices used to determine the energy of fuel gases described in the Table 1, including those of the 1st and 2nd families according to EN 437.
The energy conversion device (ECD) considered in this standard consists of an energy calculator (EC) and is associated with the following devices and/or functions:
- a volume conversion device (VCD) or a flow computer used as gas meter conversion, either conforming to EN 12405-1, or to prEN 12405-3, for high accuracy measurements;
- a calorific value determination device (CVDD).
Requirements for type approval tests of the devices, not included in the above-mentioned standards are described in appropriate annexes specified in Table 6.
For the purpose of this European Standard, the term "volume conversion devices" (VCDs) includes flow computers (FCs).
A single calculator may undertake the volume conversion functions for different metering lines.
The energy conversion device (ECD) considered in this standard consists of an energy calculator (EC) and is associated with the following devices and/or functions:
- a volume conversion device (VCD) or a flow computer used as gas meter conversion, either conforming to EN 12405-1, or to prEN 12405-3, for high accuracy measurements;
- a calorific value determination device (CVDD).
Requirements for type approval tests of the devices, not included in the above-mentioned standards are described in appropriate annexes specified in Table 6.
For the purpose of this European Standard, the term "volume conversion devices" (VCDs) includes flow computers (FCs).
A single calculator may undertake the volume conversion functions for different metering lines.
Alusdokumendid: prEN 12405-2
FprHD 60364-7-711:2025/prAA:2026
Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Temporary electrical installations for exhibitions and entertainment related purposes
Käsitlusala: The particular requirements of this part of IEC 60364 apply to the temporary electrical installations of exhibitions, shows and stands (including mobile and portable displays and equipment).
Alusdokumendid: FprHD 60364-7-711:2025/prAA:2026