Infoteenus
21.060 Kinnituselemendid
Uued standardid
EVS-EN ISO 4029:2026
Fasteners - Hexagon socket set screws with cup point (ISO 4029:2026)
Käsitlusala: This document specifies the characteristics of hexagon socket set screws with cup point, with metric coarse pitch threads M1,6 to M30 for steel and M1,6 to M24 for stainless steel, and with product grade A.
Set screws are not intended for use under tensile load.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Set screws are not intended for use under tensile load.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Alusdokumendid: ISO 4029:2026; EN ISO 4029:2026
Asendab: EVS-EN ISO 4029:2004
EVS-EN ISO 4028:2026
Fasteners - Hexagon socket set screws with dog point (ISO 4028:2026)
Käsitlusala: This document specifies the characteristics of hexagon socket set screws with dog point, with metric coarse pitch threads M1,6 to M30 for steel and M1,6 to M24 for stainless steel, and with product grade A.
Set screws are not intended for use under tensile load.
If, in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Set screws are not intended for use under tensile load.
If, in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Alusdokumendid: ISO 4028:2026; EN ISO 4028:2026
Asendab: EVS-EN ISO 4028:2004
EVS-EN ISO 4026:2026
Fasteners - Hexagon socket set screws with flat point (ISO 4026:2026)
Käsitlusala: This document specifies the characteristics of hexagon socket set screws with flat point, with metric coarse pitch threads M1,6 to M30 for steel and M1,6 to M24 for stainless steel, and with product grade A.
Set screws are not intended for use under tensile load.
If, in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Set screws are not intended for use under tensile load.
If, in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Alusdokumendid: ISO 4026:2026; EN ISO 4026:2026
Asendab: EVS-EN ISO 4026:2004
EVS-EN ISO 4027:2026
Fasteners - Hexagon socket set screws with truncated cone point (ISO 4027:2026)
Käsitlusala: This document specifies the characteristics of hexagon socket set screws with truncated cone point, with metric coarse pitch threads M1,6 to M30 for steel and M1,6 to M24 for stainless steel, and with product grade A.
Set screws are not intended for use under tensile load.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Set screws are not intended for use under tensile load.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.
Alusdokumendid: ISO 4027:2026; EN ISO 4027:2026
Asendab: EVS-EN ISO 4027:2004
ISO 10642:2026
Fasteners — Hexagon socket countersunk head screws with reduced loadability
Käsitlusala: This document specifies the characteristics of hexagon socket countersunk head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M20, and with product grade A.
NOTE 1 Other dimensional options are given in ISO 888, ISO 965-1 and ISO 4753.
NOTE 2 The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes; see Table 5.
NOTE 3 Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.
NOTE 1 Other dimensional options are given in ISO 888, ISO 965-1 and ISO 4753.
NOTE 2 The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes; see Table 5.
NOTE 3 Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.
Alusdokumendid:
Asendab: ISO 10642:2019
ISO 7380-3:2026
Fasteners — Button head screws with reduced loadability — Part 3: Hexalobular socket button head screws
Käsitlusala: This document specifies the characteristics of hexalobular socket button head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M3 to M12, and with product grade A.
If, in certain cases, other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE The reduced loadability (related to the head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.
If, in certain cases, other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE The reduced loadability (related to the head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.
Alusdokumendid:
ISO 7380-4:2026
Fasteners — Button head screws with reduced loadability — Part 4: Hexalobular socket button head screws with collar
Käsitlusala: This document specifies the characteristics of hexalobular socket button head screws with collar with reduced loadability due to head design, in steel, with metric coarse pitch threads M3 to M12, and with product grade A.
If, in certain cases, other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE The reduced loadability (related to the head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.
If, in certain cases, other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-1 or ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE The reduced loadability (related to the head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.
Alusdokumendid:
Asendatud standardid
EVS-EN ISO 4026:2004
Hexagon socket set screws with flat point
Käsitlusala: This International Standard specifies the characteristics of hexagon socket set screws with flat point and threads from M1,6 up to and including M24 and of product grade A.
Alusdokumendid: ISO 4026:2003; EN ISO 4026:2003
Asendatud: EVS-EN ISO 4026:2026
EVS-EN ISO 4027:2004
Hexagon socket set screws with cone point
Käsitlusala: This International Standard specifies the characteristics of hexagon socket set screws with cone point and threads from M1,6 up to and including M24 and of product grade A.
Alusdokumendid: ISO 4027:2003; EN ISO 4027:2003
Asendatud: EVS-EN ISO 4027:2026
EVS-EN ISO 4028:2004
Hexagon socket set screws with dog point
Käsitlusala: This International Standard specifies the characteristics of hexagon socket set screws with dog point and threads fom M1,6 uo to and including M24 and of product grade A.
Alusdokumendid: ISO 4028:2003; EN ISO 4028:2003
Asendatud: EVS-EN ISO 4028:2026
EVS-EN ISO 4029:2004
Hexagon socket set screws with cup point
Käsitlusala: This Internation Standard specifies the characteristics of hexagon socket set screws with cup point and threads from M1,6 up to and including M24 and of product grade A.
Alusdokumendid: ISO 4029:2003; EN ISO 4029:2003
Asendatud: EVS-EN ISO 4029:2026
ISO 10642:2019
Fasteners -- Hexagon socket countersunk head screws with reduced loadability
Käsitlusala: This document specifies the characteristics of hexagon socket countersunk head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M20, and with product grade A.
NOTE 1 Other dimensional options are given in ISO 888, ISO 965-1 and ISO 4753.
NOTE 2 The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load; see Table 5.
NOTE 3 Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.
NOTE 1 Other dimensional options are given in ISO 888, ISO 965-1 and ISO 4753.
NOTE 2 The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load; see Table 5.
NOTE 3 Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.
Alusdokumendid:
Asendatud: ISO 10642:2026